1.0 / March 3, 2014
(3.7/5) (3)

Description

https://play.google.com/store/apps/details?id=app.akexorcist.wiflyswitchcontroller

Please attention:http://www.smartarduino.com/

Application for control Unicon board via WiFi to control LED.Usewith WiFly Module from Sparkfun to communication by TCPconnection.Make your android device to WiFi Hotspot and programmedPOP-BOT XTto connected to that hotspot. You can applied circuit toreal lightbulb or outlet in your home.

If you want to control with the PC, use this.
http://goo.gl/lf9Qo

** WLAN only, not include internet connection.

ZX-LED : http://goo.gl/X352h
Unicon Board : http://goo.gl/95WTK
RN-XV WiFly Module : http://goo.gl/AjHqY

Connect WiFly Module to UART1 on pin 0 (RXD) and pin1(TXD)
connect pin 4 (A6) and 19 (A1) with 1st ZX-LED
connect pin 12 (A11) and 21 (A3) with 2nd ZX-LED
connect pin 30 (A2) and 20 (A2) with 3rd ZX-LED
connect pin 6 (A7) and 22 (A4) with 4th ZX-LED

Source code for this project
(Include C# for PC, Eclipse for Android, Arduino for UniconBoardand .exe for PC)
http://goo.gl/zMKOG

WiFly's library for arduino to used with this application
https://github.com/harlequin-tech/WiFlyHQ


See more detail from www.tpemagazine.com on issue 38

App Information WiFiSwitchController

Smartarduino China Show More...

WiFi Tether 1.0 APK
The app come from:https://play.google.com/store/apps/details?id=org.spanA special thanks goes out to the WiFi Tether for Root Users appteam:http://code.google.com/p/android-wifi-tether/Check out our source code:http://github.com/ProjectSPANQuestions? Problems? Want to contribute? Post on our Googlegroup:http://groups.google.com/forum/#!forum/spandevThis project is in part funded by The MITRE Corporation:http://www.mitre.org/Welcome to the world of smart phone ad-hoc networking! This appturns your phone or tablet into a peer-to-peer communicationdevice. You don't need a cell plan, access point, or even anInternet connection, just a bunch of friends with ad-hoc-enableddevices of their own.Requirements:- Root access- Kernel which supports wireless extensions (wext)- Wireless device driver which supports ad-hoc mode (Broadcom workswell)Supported devices:- Samsung Galaxy Tab 10.1- Samsung Galaxy S II Epic Touch 4G SPH-D710- Samsung Galaxy Nexus SCH-I515 (custom kernel)- Samsung Galaxy S III GT-I9300 I9300UBDLJ1 (Latin Americancountries) (custom kernel)- Samsung Galaxy S III GT-I9300 I9300XXBLH1 (Nordic countries)(custom kernel)- ASUS Transformer Prime TF201 (custom kernel)- ASUS Nexus 7 (custom kernel)The custom kernels can be installed using ClockworkMod Recovery.Download them here:http://github.com/monk-dot/SPAN/tree/master/kernelsThis simple app allows you to enable and configure a MobileAd-Hoc Network (MANET) for your device. Install the app on anotherdevice and they will automagically recognize and link to each otherwhen they are within ~500 feet. Install the app on even moredevices and expand the range of your mesh network! The app willroute data from one device to another and "hop" across otherdevices in the mesh to get there. In short, the more devices inyour mesh the greater your communication range.This app also allows you to share your phone's cell connectionwith other devices in the mesh.Questions? Problems? Want to contribute? Post on our Googlegroup:http://groups.google.com/forum/#!forum/spandev
Car(AP Mode) 1.0 APK
based on esp8266 and nodemcu(http://www.smartarduino.com)This application is designed to be used to control a wifi car in APMode.
Bluetooth Wireless Monitoring 0.56 APK
The app based on:https://code.google.com/p/amarinoYour just need connect your hardware device and your mobiledevice( a mobile phone or a tablet) with bluetooth.Instructions:First,install the APK on your mobile device.Second,connected your hardware devices to a computer.Third, open the computer debugging assistant and Bluetooth WirelessMontoring.Fourth, search the hardware device, and connect it.Fifth,send data for monitoring.Resource code:http://amarino.googlecode.com/svn/trunkLabels:android, arduino, bluetooth,debugger,monitoring,debuggingtool,
DoHome 5.0.9 APK
This is an app for DoHome device
Bluetooth Debugging Tool 1.0 APK
Other name:Bluetooth debuggerThe app come from:https://play.google.com/store/apps/details?id=net.bluetoothviewerThis app is a simple Bluetooth connection debugging tool.Yourjust need connect your hardware device and your mobile device( amobile phone or a tablet) with bluetooth.Instructions:First,install the APK on your mobile device.Second,connected your hardware devices to a computer.Third, open the computer debugging assistant and Bluetooth TestTool.Fourth, search the hardware device, and connect it.Fifth,send instructions for debugging.The source can be found on github: https://github.com/janosgyerik/bluetoothviewer
WiFi Debugging Assistant 1.0 APK
WIFI debuggerThis is a TCP debugging tools by WiFi. It is very good to help youto test your serial debugging.Your just need connect your hardware device and your mobile device(a mobile phone or a tablet) with WiFi.Instructions:First,install the APK on your mobile device.Second,connected your hardware devices to a computer.Third, open the computer debugging assistant and WiFi DebuggingAssistant.Fourth,for the network configuration,enter IP address and iport,then connect it.Fifth,send instructions for debugging.
Arduino Shield Board 3 in 1 1.0 APK
Arduino Shield Board 3 in 1 Bluetooth ZigbeeWIFI Expansion Extended Base Extension
Smart Door and Windows 1.0 APK
A special thanks goes out to the house4hackapp team:https://play.google.com/stor/apps/details?id=za.co.house4hack.shacSmart Door and Windows is an app that is used to open doors andwindows.It uses a web2py backend which integrates with a simple webserver running on an Arduino with Ethernet and Relay shields.TheRelay shield is connected to the windows and doors remote controlsto activate them. The web2py backend authenticates the user. Theuser can sign-in on the app using their Google account.The app we adapted from other, but in the original function onthe basis of a modified and promoted.If you want download arduino code,you can focus on:https://github.com/house4hack/openSHAC/tree/master/arduinoplease attention of:http://www.smartarduino.com/KEYWORDS: WiFi, REMOTE CONtROL, Smart Home System, WSN