2.5 / April 22, 2015
(3.6/5) (687)

Description

Thank you for using my app!

DESCRIPTION
- With this application you can measure the acceleration of avehicle to the desired speed
- The measurement results are stored in the memory of your deviceand you can view them at any time
- In addition, the measurement results can be exported toexcel-file (only available in the paid version)
- The measurement results can be viewed as graphs, as well as tocompare the results of several graphics (available in the paidversion)

HOW IT WORKS
- Metering is carried out using an accelerometer sensor, andGPS.
- However, you can take measurements without GPS, but if the roadsurface is not smooth, it is a great error of theaccelerometer
- In order to measure as accurate as possible road should be asflat and straight, and the level of GPS signal is good (more than10 active satellites)
- To filter erroneous data from the accelerometer on the rough roadtemporal filter is applied, the level of filtering can be set inthe application settings

INSTRUCTIONS FOR MEASURING:
1. Turn on the GPS and wait for a good reception
2. Secure the device in a fixed position in the car
3. Calibrate the accelerometer clicking calibrate
4. When the message "Ready to Start" can start the measurementstarts automatically
5. Upon reaching the desired speed measurement result isautomatically saved

App Information Measure acceleration Demo

  • App Name
    Measure acceleration Demo
  • Package Name
    ru.autotest.acceleration
  • Updated
    April 22, 2015
  • File Size
    6.5M
  • Requires Android
    Android 4.0.3 and up
  • Version
    2.5
  • Developer
    Sergey Vorobyev
  • Installs
    50,000 - 100,000
  • Price
    Free
  • Category
    Transportation
  • Developer
    Email [email protected]
    Russia, Ekaterinburg, Shamanova str 50
  • Google Play Link

Measure acceleration Demo Version History

Select Measure acceleration Demo Version :
  • 2.5 (23) - Latest Version
  • Measure acceleration Demo 2.5 APK File

    Publish Date: 2016 /2/11
    Requires Android: Android 4.0.3+ (Ice Cream Sandwich, API: 15)
    File Size: 6.5 MB
    Tested on: Android 5.1 (Lollipop, API: 22)
    File Sha1: 8df047fadc2bc8dc4196f89b19f4ec8969a3204b
    APK Signature: 5b5380ee82e480ef15f0e745fa4b4bc94f35e844

Sergey Vorobyev Show More...

Measure acceleration Demo 2.5 APK
Thank you for using my app!DESCRIPTION- With this application you can measure the acceleration of avehicle to the desired speed- The measurement results are stored in the memory of your deviceand you can view them at any time- In addition, the measurement results can be exported toexcel-file (only available in the paid version)- The measurement results can be viewed as graphs, as well as tocompare the results of several graphics (available in the paidversion)HOW IT WORKS- Metering is carried out using an accelerometer sensor, andGPS.- However, you can take measurements without GPS, but if the roadsurface is not smooth, it is a great error of theaccelerometer- In order to measure as accurate as possible road should be asflat and straight, and the level of GPS signal is good (more than10 active satellites)- To filter erroneous data from the accelerometer on the rough roadtemporal filter is applied, the level of filtering can be set inthe application settingsINSTRUCTIONS FOR MEASURING:1. Turn on the GPS and wait for a good reception2. Secure the device in a fixed position in the car3. Calibrate the accelerometer clicking calibrate4. When the message "Ready to Start" can start the measurementstarts automatically5. Upon reaching the desired speed measurement result isautomatically saved
Measure acceleration 1.5 APK
Sergey Vorobyev
Thank you for using my app!DESCRIPTION- With this application you can measure the acceleration of avehicle to the desired speed- The measurement results are stored in the memory of your deviceand you can view them at any time- In addition, the measurement results can be exported toexcel-file- The measurement results can be viewed as graphs, as well as tocompare the results of several graphicsHOW IT WORKS- Metering is carried out using an accelerometer sensor, andGPS.- However, you can take measurements without GPS, but if the roadsurface is not smooth, it is a great error of theaccelerometer- In order to measure as accurate as possible road should be asflat and straight, and the level of GPS signal is good (more than10 active satellites)- To filter erroneous data from the accelerometer on the rough roadtemporal filter is applied, the level of filtering can be set inthe application settingsINSTRUCTIONS FOR MEASURING1. Turn on the GPS and wait for a good reception2. Secure the device in a fixed position in the car3. Calibrate the accelerometer clicking calibrate4. When the message "Ready to Start" can start the measurementstarts automatically5. Upon reaching the desired speed measurement result isautomatically saved
Measure power of car 1.4 APK
Sergey Vorobyev
Thank you for using my app!DESCRIPTION- With this application you can measure torque and horsepower carengine- The measurement results are stored in the memory of your deviceand you can view them at any time- In addition, the measurement results can be exported toexcel-file- The measurement results can be viewed as graphs, as well as tocompare the results of several graphicsHOW IT WORKS- The measurement is carried out using the accelerometer sensor.Torque and power are calculated from the data obtained with theaccelerometer and the said vehicle parameters- Vehicle parameters can usually be found in its detailed technicaldescription- Meters in one gear. Typically, the best second transfer- In order to measure as accurate as possible road should be asflat and straight- To filter erroneous data from the accelerometer on the rough roadtemporal filter is applied, the level of filtering can be set inthe settings (Inertia accelerometer)DESCRIPTION OF PARAMETERS- Inertia accelerometer. Used to filter erroneous values ​​of theaccelerometer on the rough road- The rigidity of the suspension. In sharp acceleration of thevehicle has a longitudinal roll, which depends on the stiffness ofthe suspension. This parameter is required to compensate for theaccelerometer in roll- Maximum engine speed. This parameter is required for calculatingthe maximum power of the engine and to calculate the speed at whichthe measurement ends- The initial velocity measurement. With this speed powermeasurement begins. Specify it so that it is slightly above thespeed at which you turn on your chosen transfer- Transmission gear ratios and tire size it is necessary to specifyall cars are different- The air resistance. Parameter can not change, but for large carshigh this parameter can be a little increase- Coefficient of deformation of the wheel. Parameter can not bechanged. However, for vehicles with high profile tires, thisparameter can be increased slightly- Losses in transmission. Parameter can not be changed. However,for four-wheel drive vehicles this parameter better slightlyincrease theINSTRUCTIONS FOR MEASURING1. Enter the configuration parameters of your vehicle2. Secure the device in a stationary state2. Calibrate the accelerometer to calibrate by pressing3. When the message "ready to start" gently move your vehicle whenyou turn on the selected gear, fully depress the accelerator pedaland accelerate up to the cut-off rpm4. When the speed of the display is equal to the speed at the speedof the cut-off, the measurement is completed, the result willremain
Measure power of car Demo 1.4 APK
Thank you for using my app!DESCRIPTION- With this application you can measure torque and horsepowercarengine- The measurement results are stored in the memory of yourdeviceand you can view them at any time- In addition, the measurement results can be exported toexcel-file(only available in the paid version)- The measurement results can be viewed as graphs, as well astocompare the results of several graphics (available in thepaidversion)HOW IT WORKS- The measurement is carried out using the accelerometersensor.Torque and power are calculated from the data obtained withtheaccelerometer and the said vehicle parameters- Vehicle parameters can usually be found in its detailedtechnicaldescription- Meters in one gear. Typically, the best second transfer- In order to measure as accurate as possible road should be asflatand straight- To filter erroneous data from the accelerometer on the roughroadtemporal filter is applied, the level of filtering can be setinthe settings (Inertia accelerometer)DESCRIPTION OF PARAMETERS- Inertia accelerometer. Used to filter erroneous values ​​oftheaccelerometer on the rough road- The rigidity of the suspension. In sharp acceleration ofthevehicle has a longitudinal roll, which depends on the stiffnessofthe suspension. This parameter is required to compensate fortheaccelerometer in roll- Maximum engine speed. This parameter is required forcalculatingthe maximum power of the engine and to calculate thespeed at whichthe measurement ends- The initial velocity measurement. With this speedpowermeasurement begins. Specify it so that it is slightly abovethespeed at which you turn on your chosen transfer- Transmission gear ratios and tire size it is necessary tospecifyall cars are different- The air resistance. Parameter can not change, but for largecarshigh this parameter can be a little increase- Coefficient of deformation of the wheel. Parameter can notbechanged. However, for vehicles with high profile tires,thisparameter can be increased slightly- Losses in transmission. Parameter can not be changed. However,forfour-wheel drive vehicles this parameter better slightlyincreasetheINSTRUCTIONS FOR MEASURING1. Enter the configuration parameters of your vehicle2. Secure the device in a stationary state2. Calibrate the accelerometer to calibrate by pressing3. When the message "ready to start" gently move your vehiclewhenyou turn on the selected gear, fully depress the acceleratorpedaland accelerate up to the cut-off rpm4. When the speed of the display is equal to the speed at thespeedof the cut-off, the measurement is completed, the resultwillremain
PhotoUploader - sending a photos 1.0-4 APK
An application for convenient sending of photos tovariousrepositories. At the moment, you can send photos to thefollowingtypes of repositories:   - over a local networkto ashared folder;   - to your FTP-server;   -overthe HTTP or HTTPS protocol to your web server as multipart/form-data;   - on your Google Drive Theapplicationallows you to send multiple photos from the gallerysimultaneouslyor one photo directly from the camera. Theapplication canautomatically delete from your device successfullysent photos.This function is disabled by default, it can be enabledin theapplication settings.