**** This is an old version, please use myLockPhone Lite app ****A simple application to lock your device with a single touch,andprevent you from wearing out your lock key.Select the application from your application drawer and put itonyour home screen.This has been tested on the following devices:- Galaxy S3 phone and Galaxy Tab 10.1 tablet runningAndroid4.0.- Nexus 7 tablet running Android 4.1.Notes1) This app requires a plugin application called SecureSettings.When you first run the app, you will be asked if you wanttoretrieve this plugin from Google Play (see screen shot).Pleaseselect "ok".2) The Secure Settings plugin requires deviceadministratorprivilege to be able to lock the screen. Afterinstalling, pleaseactivate device administrator privilege for theSecure Settingsplugin by going to Settings>Security>DeviceAdministrators,and ticking the check box for Secure Settings (seescreenshot).3) If you get an error message when running the application(seescreen shot) this will be because device administratorprivilegehas not been granted. Please follow note (2) above.4) There is a known problem with Android version 4.0 wherethescreen turns off and then on again, which has been fixed inAndroidversion 4.1. If you have lock security set (e.g. PIN), thelockscreen will be displayed when the screen switches back on.This application was developed using Tasker and TaskerAppFactory.

This app is designed to help you simply and automatically controlyour phone ringer. It has been designed to be relativelystraightforward to use, whilst giving a reasonable degree ofcontrol and automation. It has a number of settings and featuresthat can be configured by you to control your ringer andnotification sounds: ★ A FLIP PHONE mode: This is used to silenceyour phone when you have an incoming call. When your phone rings,just flip it over to silence the ringer. This even works forpriority interruptions in Android Lollipop! You can also choosewhether the flip action silences just the current call, or turnsthe phone into silent mode, so it doesn’t ring again (see timeoutmode below). In Lollipop, this will silence non-priority calls, butpriority calls will cause the phone to ring, but they can besilenced by flipping the phone over again when it rings. ★ A TOGGLEWIDGET for the home screen: This will toggle the ringer through thesettings you configure. You can chose to include Silent, Vibrateonly, Sound only or both Sound & Vibrate modes. This isparticularly useful if you want to quickly switch vibrate on andoff for calls, without going through the system menus. The widgetcolour and icon indicate the current setting – red for silent,orange for vibrate and green for sound, and the icon changes too. ★A TIMEOUT mode: This can be configured so that when you silence theringer with this app, either by using the toggle widget or byflipping the phone into silent mode when you have an incoming call,the ringer will be re-enabled automatically after a specifiedperiod of time, so that you do not inadvertently leave your devicein silent mode, and miss all your calls and notifications. You canspecify the timeout duration in hours and minutes. For this mode,you can decide whether or not to display a notification messagewhich will show the time when the ringer will be automaticallyre-enabled. Selecting the notification or toggling the ringer modeby using the widget, or enabling the ringer through any other meanson the phone, such as pressing the volume up key (or settinginterruptions mode to All in Lollipop), will immediately re-enablethe ringer and cancel timeout mode. You can also chose which ringmode is set when Timeout mode ends – Vibrate only, Sound only orSound & Vibrate. ★ A QUIET mode: This can be configured so thatyour phone enters silent mode between the specified times e.g. fornight time. For this mode, you can decide whether to display anotification message which will show the date and time that quietmode is scheduled to end. Selecting the notification or togglingthe ringer mode through the widget, or enabling the ringer throughany other means on the phone, such as pressing the volume up key(or setting interruptions mode to All in Lollipop), willimmediately re-enable the ringer and cancel quiet mode. You canalso chose which ring mode is set when Quiet mode ends – Vibrateonly, Sound only or Sound & Vibrate. You can also manuallystart or stop the Quiet mode through use of a button on the Quietsettings screen. NOTES: ★ This app has been tested and works wellon Android Lollipop (some similar apps no longer work in Lollipopdue to changes in the way silent mode works). ★ This app is alsobeen extensively tested on the following versions of Android:Gingerbread, ICS, Jelly Bean, Kitkat & Lollipop. It has notbeen tested on Honeycomb, as the app is primarily for phones, andHoneycomb was a tablet only version of Android. ★ The app will workon tablets, but you will get a warning message that somefunctionality has been disabled, and the following items will bedisabled: flip mode & vibrate settings. ★ Alarms sounds are notcontrolled by this app. ★ Please let me know of any other featuresyou feel may be use to add to this app.

Use this simple application to quickly toggle your Bluetooth on/off(from on to off and back again). It is particularly useful forthose android phones with no quick settings bar on thenotifications pull down, such as some HTC devices. Put the widgeton your home screen and tap it to toggle your Bluetooth setting.The widget indicates the current Bluetooth setting by the colour ofthe Bluetooth icon as follows: - Green: Bluetooth is on - Red:Bluetooth is off Note that the widget colour also updates if theBluetooth setting is changed by some other means (such as from thesystem settings), unlike some of the other toggle widgetsavailable, so you always know the Bluetooth status state from thewidget colour. Alternatively, use the app to toggle your Bluetoothsetting, by selecting the checkbox in the app. When using the app,an on screen message will be displayed informing you of whether youhave turned Bluetooth on or off.

A simple application which toggles your Wi-Fi setting on/off (fromenabled to disabled and back again). Add the widget to your homescreen to use the app. The widget indicates the current Wi-Fistatus by the colour of the Wi-Fi icon as follows: - Green: Wi-Fiis enabled and connected to a Wi-Fi access point - Light blue:Wi-Fi is enabled, but not connected to a Wi-Fi access point -Amber: Wi-Fi is either being enabled or disabled - Red: Wi-Fi isdisabled Note that the widget colour also updates if the Wi-FIsetting is changed by some other means (such as from the systemsettings), unlike some of the other toggle widgets available, soyou always know the Wi-Fi status state from the widget colour.

Use this simple application to quickly toggle your phone ringeron/off (from ringing to silent and back to ringing again). It isparticularly useful for those Android phones with no quick settingsbar on the notifications pull down, such as HTC and Nexus devices.Note you cannot set to Vibrate mode with this app. Add the widgetto your home screen to use the app. The widget shows green when theringer is on, red when the ringer is off, and amber when the phoneis in vibrate mode (note will be amber if phone set to vibrate byalternative means). Note that the widget colour also updates if theringer is changed by some other means (such as the volume key orfrom the system settings), unlike some of the other toggle widgetsavailable, so you always know the ringer state from the widgetcolour.

Fed up with having to enter your Device's PIN when at home or atwork - then this app is for you. This is a build upon my freeToggle Lock app, and takes the manual toggle concept of that appfurther, by automatically toggling your Device security betweenenabled and disabled based on your device's connection to selectedWi-Fi networks. You can still manually toggle security from enabledto disabled and back again, through the app itself or a home screenwidget, but now you can also specify which Wi-Fi networks you wantto use to enable or disable your Device's security automatically.When your Device connects to the specified Wi-Fi network, theDevice security will automatically be disabled, and remaindisabled, until your Device disconnects from the specified Wi-Finetwork, when the Device security will be automatically enabledagain. You can use the app or the widget to manually toggle thesetting, effectively overriding the automatically set state. Thewidget colour also indicates the current security setting, whetherset manually or automatically - red indicates that security isdisabled, green indicates that security is enabled - and is greatto install on your home screen for quick access and so you can seeat a single glance what the security setting is. Displaynotifications can be set on or off to show when security has beendisabled. If notifications are set to on, a warning icon isdisplayed in the notification bar when security is disabled (note,not when security is enabled). The notification can then beselected to quickly re-enable security. Warning messages can alsobe set on or off, to display an on-screen message when the securitysetting is changed automatically by the app (note, not if thedevice screen is off). To indicate how this should work, imaginethe following scenario: - I am at home, connected to my home Wi-Finetwork - the device security is set to disabled, and I do not haveto enter my PIN to access the device - I leave the house and driveoff to work - as soon as my phone disconnects from my home Wi-Fithe device security is enabled, and I would now have to enter myPIN to access my device, so my device is now secure if I loose itwhen out and about - I get to work, and go into the office, wheremy device automatically connects to my work Wi-Fi - the devicesecurity is automatically disabled again, and I do not have toenter my PIN to access the device ★ ★ ★ IMPORTANT NOTE - SAMSUNGOWNERS PLEASE READ ★ ★ ★ Samsung seem to have de-activated some ofthe security programming settings within some of their versions ofAndroid, which means that whilst my app works on some versions ofSamsung's Android software, and many other manufacturer's phones,the app does not appear to work on many Samsung versions ofAndroid. I'm afraid this is down to Samsung, not my app, andunfortunately there is nothing that I can do to make my app work inthese instances. The way in which this app disables the securitysettings is exactly the same as in my free Toggle Lock app, so Isuggest that you install my free Toggle Lock app, and try it outfirst on your device - if that app works ok on your device, thenthis paid app will also work. Please do this to avoiddisappointment of paying for an app that may not work on yourdevice. OTHER NOTES: 1) This app requires device administratorprivilege to be able to lock the screen. After installing and thefirst time you run the app, you will be prompted to activate thelock screen admin. Please select "activate". 2) To un-install theapp, please revoke the device administrator setting for this app inSettings>Security>Device Administrators, and de-selecting thecheck box, which will prompt you to deactivate the lock screenadmin. Please select "deactivate" and then you will be able toun-install the app in the usual way. Keywords: Enable DisableSecurity Keyguard On Off Pattern PIN Password Lock UnlockAutomatically WiFi Wi-Fi

This app is designed to enable you to toggle your phone securityfrom enabled to disabled and back again without having to gothrough the device settings menus. This is very useful if you donot like having to enter your security PIN, Pattern or Passwordwhen you are at home, but then want to easily enable security witha single click when you leave home so that your device is safe whenyou are out. The app includes a setup screen and a re-sizable 1x1toggle widget. The widget can be used to quickly toggle thesecurity setting between enabled and disabled. The widget showsgreen when security is enabled, and red when security is disabled.Display notifications can be set on or off to show when securityhas been disabled. If notifications are set to on, a warning iconis displayed in the notification bar when security is disabled(note, not when security is enabled). The notification can then beselected to quickly re-enable security. Note that when you re-startyour device, even if you had previously disabled security, you willbe required to enter your PIN, Pattern or Password. After you havekeyed the code in the first time after re-start, the security willthen be automatically disabled again if that was the setting beforeyou switched your device off. IMPORTANT NOTES: ★ When designingthis app, it was not possible to leave a slide or swipe only screenin place when security is disabled, as the security programmingsettings within Android only allow me to turn off securitycompletely, rather than change the type of security that iscurrently set. Some people have fed back that it would be useful toleave the slide or swipe security screen in place, but I'm afraidthat this is just not possible with the programming settingsavailable within Android. ★ Samsung seem to have de-activated someof the security programming settings within some of their versionsof Android, which means that whilst my app works on some versionsof Samsung's Android software, and many other manufacturer'sphones, the app does not appear to work on many Samsung versions ofAndroid. I'm afraid this is down to Samsung, not my app, andunfortunately there is nothing that I can do to make my app work inthese instances. ★ In Android version 4.0.n (ICS), when devicesecurity is disabled, selecting a notification will display thelock screen. This is a known bug in this version of Android. Onceyou have re-entered your pattern, PIN or password, device securitywill be disabled again without having to toggle security settingsmanually. Keywords: Enable Disable Security Keyguard On Off PatternPIN Password Lock Unlock