1.0 / July 5, 2014
(4.2/5) (6)

Description

Cette application offre la possibilité decontrôler deux moteurs en fonction des valeurs x et y captées parle téléphone.
Aussi, une commande à glissière permet de régler l'angle d'un servomoteur sur la broche pwm3
Finalement, l'application commande deux sorties numériques D12 etD13.

Remarques:
Le code .ino doit être téléversé dans le module Arduino avant delancer l'application.
Si vous éprouvez des difficultés avec le module bluetooth, débutezavec l'application suivante: MIT_bluetooth_accel


Fichiers:
robot_bluetooth_arduino.aia : code source de l'application Android(crée avec MIT app inventor 2)
robot_bluetooth_arduino.apk : Application Android
robot_bluetooth_arduino_MIT.ino : Code source Arduino(firmware)
robot_bluetooth_arduino_MIT.vi : Code source LABVIEW

Adresse de téléchargement:
http://netsciences.ca/arduino/MIT_robot_bluetooth/

Les codes source vous permettent de personnaliser le projet.

This application offersthe possibility of controlling the two motors as a function of xand y values ​​captured by the phone.
Also, a slide control to adjust the angle of a servo motor to thespindle PWM3
Finally, the application controls two D12 and D13 digital outputs.

Notes:
The code .ino be uploaded to the Arduino module before starting theapplication.
If you are having trouble with the bluetooth module start with thefollowing application: MIT_bluetooth_accel


Files:
robot_bluetooth_arduino.aia: source code of the Android application(app created with MIT inventor 2)
robot_bluetooth_arduino.apk: Android Application
robot_bluetooth_arduino_MIT.ino: Arduino source code(firmware)
robot_bluetooth_arduino_MIT.vi: Source Code LABVIEW

Download address:
 http://netsciences.ca/arduino/MIT_robot_bluetooth/

The source codes allow you to customize the project.

App Information Robot Arduino avec Bluetooth

  • App Name
    Robot Arduino avec Bluetooth
  • Package Name
    appinventor.ai_yvon_quemener.robot_bluetooth_arduino
  • Updated
    July 5, 2014
  • File Size
    1.3M
  • Requires Android
    Android 1.5 and up
  • Version
    1.0
  • Developer
    Yvon Quémener
  • Installs
    1,000 - 5,000
  • Price
    Free
  • Category
    Education
  • Developer
  • Google Play Link

Robot Arduino avec Bluetooth Version History

Select Robot Arduino avec Bluetooth Version :
  • 1.0 (1) - Latest Version
  • Robot Arduino avec Bluetooth 1.0 APK File

    Publish Date: 2016 /2/29
    Requires Android: Android 1.5+ (Cupcake, API: 3)
    File Size: 1.3 MB
    Tested on: Android 1.5 (Cupcake, API: 3)
    File Sha1: c2ed78d4b276be3f02bf5878b60d4ae503843e9c
    APK Signature: 243dbe6ec896b7e9cb755302d7e2ae633c4b4290

Yvon Quémener Show More...

Arduino bluetooth avec MIT 1.0 APK
Créer votre première application Bluetooth pour ArduinoCette application minimaliste vous explique comment créerfacilement votre première application Android.L'exemple contrôle l’état des broches 12 et 13 d’un module Arduinorelié en bluetooth.Matériel requis : Arduino UNO et module Bluetooth HC-05.1. Télécharger les fichiers : http://netsciences.ca/arduino/MIT/2. Programmer votre module arduino à l’aide du fichierArduino_PCH.inoLe module Bluetooth HC-05 ne doit pas être raccordé lors dutéléversement du code.3. Se connecter au site MIT App Inventor 2.4. Importer le fichier bluetooth.aia et personnaliser votre projetà partir de cet exemple.5. Créer votre votre APK personnaliséeCreateyour first Bluetooth application for ArduinoThis minimalist application shows you how to easily create yourfirst Android application.The example checks the status of the pins 12 and 13 an Arduinomodule connected bluetooth.Materials: Arduino UNO and HC-05 Bluetooth module.1. Download files: http://netsciences.ca/arduino/MIT/2. Program your Arduino Module using Arduino_PCH.ino file The HC-05 Bluetooth module must not be connected when theupload code.3. Login to site MIT App Inventor 2.4. Import bluetooth.aia file and customize your project from thisexample.5. Create your custom web APK
Robot Arduino avec Bluetooth 1.0 APK
Cette application offre la possibilité decontrôler deux moteurs en fonction des valeurs x et y captées parle téléphone.Aussi, une commande à glissière permet de régler l'angle d'un servomoteur sur la broche pwm3Finalement, l'application commande deux sorties numériques D12 etD13.Remarques:Le code .ino doit être téléversé dans le module Arduino avant delancer l'application.Si vous éprouvez des difficultés avec le module bluetooth, débutezavec l'application suivante: MIT_bluetooth_accelFichiers:robot_bluetooth_arduino.aia : code source de l'application Android(crée avec MIT app inventor 2)robot_bluetooth_arduino.apk : Application Androidrobot_bluetooth_arduino_MIT.ino : Code source Arduino(firmware)robot_bluetooth_arduino_MIT.vi : Code source LABVIEWAdresse de téléchargement:http://netsciences.ca/arduino/MIT_robot_bluetooth/Les codes source vous permettent de personnaliser le projet.This application offersthe possibility of controlling the two motors as a function of xand y values ​​captured by the phone.Also, a slide control to adjust the angle of a servo motor to thespindle PWM3Finally, the application controls two D12 and D13 digital outputs.Notes:The code .ino be uploaded to the Arduino module before starting theapplication.If you are having trouble with the bluetooth module start with thefollowing application: MIT_bluetooth_accelFiles:robot_bluetooth_arduino.aia: source code of the Android application(app created with MIT inventor 2)robot_bluetooth_arduino.apk: Android Applicationrobot_bluetooth_arduino_MIT.ino: Arduino source code(firmware)robot_bluetooth_arduino_MIT.vi: Source Code LABVIEWDownload address: http://netsciences.ca/arduino/MIT_robot_bluetooth/The source codes allow you to customize the project.
Arduino bluetooth Accel 1.0 APK
L'application transmet les informations x, y,et z captées par le détecteur 3 axes du téléphone cellulaire versle module ARduino.La communication se fait par un récepteur Bluetooth JY-MCUconfiguré à un baud rate de 38400.La reprogrammation du bluetooth à 38400 assure la compatibilitéavec le logiciel Scratch.Les codes sont fournis:- bluetooth_accel.aia- bluetooth_accel.pdf- Arduino_MIT_38400_ACL.ino- config_baudrate_bluetooth.inoAdresse de téléchargement:http://netsciences.ca/arduino/MIT_bluetooth_accel/Dans l'ordre, vous devez,1. raccorder le récepteur bluetooth à arduino aux broches 10, 11,+5V, GND2. programmer arduino à l'aide du fichierconfig_baudrate_bluetooth.ino Ensuite modifier son nom et sonbaudrate3. débrancher le module bluetooth4. reprogrammer le module arduino avec:Arduino_MIT_38400_ACL.ino5. débrancher le câble USB et relier le récepteur bluetooth aumodule arduino en utilisant les broches 0, 1, +5V, GND6. ajouter l'écran ACL et l'alimentation7. effectuer le pairage du bluetooth avec l'appareil (code1234)8. lancer l'application androidThe application transmitsinformation x, y, z and sensed by the detector 3 to the axes of thecell phone Arduino module.Communication is via a Bluetooth receiver JY-MCU set to a baud rateof 38400.Reprogramming bluetooth 38400 ensures compatibility with theScratch software.The codes are provided:- Bluetooth_accel.aia- Bluetooth_accel.pdf- Arduino_MIT_38400_ACL.ino- Config_baudrate_bluetooth.inoDownload address:http://netsciences.ca/arduino/MIT_bluetooth_accel/In order, you must1 connect the Arduino Bluetooth receiver to pins 10, 11, +5 V,GND2 Arduino programming using the file config_baudrate_bluetooth.inothen change its name and baudrate3 disconnect the Bluetooth Module4 reprogram the module with Arduino:Arduino_MIT_38400_ACL.ino5 Disconnect the USB cable and connect the Bluetooth receivermodule Arduino using pins 0, 1, +5 V, GND6, add the monitor and power supply7 perform pairing with bluetooth device (1234)8 start android application
Robot_Arduino_LEGO 1.1 APK
L'applicationElle transmet deux valeurs (Y et Z le l'accéléromètre) sous laforme de nombres entiers séparés par des virgules.Le programme est évolutif car six valeurs peuvent être transmises.BluetoothLes commandes sont reçues par un module Bluetooth HC-06 raccordésur le module Arduino.Remarque : la vitesse de transfert est réglé à 38400 bauds.Elle peut être réduite à 9600 bauds selon la configuration duBluetooth.Le changement s'effectue dans le code Arduino.Serial.begin(38400); //remplacer pour 9600 au besoinContrôle d'erreursLa somme des valeurs transmises est contrôlée lors de laréception.Si le total ne correspond pas, la commande est ignorée.Cette application a été développée à partir de l'application enligne MIT app inventor. (gratuit)Code sourceLe code source de ce programme MIT ainsi que le code deprogrammation du module Arduino peuvent être téléchargés àl'adresse ci-dessous:http://netsciences.ca/arduino/MIT_Robot_Arduino_LEGO/ApplicationIt transmits two values ​​(the Y and Z accelerometer) in the formof integers separated by commas.The program is evolving as six values ​​can be transmitted.BluetoothOrders are received by a HC-06 Bluetooth module connected to theArduino module.Note: the transfer rate is set to 38400 baud.It may be reduced to 9600 according to the Bluetoothconfiguration.The change takes place in the Arduino code.  Serial.begin (38400); // Replace the need for 9600Error checkThe sum of the values ​​transmitted is controlled uponreceipt.If the total does not match, the command is ignored.This application was developed from the application online MIT appinventor. (Free)Source codeThe source code for the MIT program and the Arduino Moduleprogramming code can be downloaded at the address below:http://netsciences.ca/arduino/MIT_Robot_Arduino_LEGO/
Robot lance-balles pingpong 1.0 APK
Le robot peut être contrôlé parl'applicationAndroid ou le logiciel Labview.Caractéristiques de l'interface:- Commande du robot par les axes x et y de l'accéléromètre- Glissière à l'écran : angle de tir- Bouton de commande à l'écran : activation du moteur de la rouedefriction- Bouton de commande à l'écran : déclencheur de la balleLe projet nécessite le code source:robot_ping_pong_google_play.inoThe robot canbecontrolled by the Android application or Labview software.Interface Specifications:- Control of the robot by the x and y axes oftheaccelerometer- Slide on the screen: angle shot- Control button on the screen: activation enginefrictionwheel- Control button on the screen: trigger the ballThe project requires the sourcecode:robot_ping_pong_google_play.ino