1.1 / August 15, 2014
(4.0/5) (2)

Description

Hydroid DNC is the android application forsending or receiving DNC data using wireless bluetoothecommunication between smart device and NC machine.
Hydroid DNC supports most of the machines, Fanuc, Vision,Mazak,Sentrol, Tosnac, Haas, Daewoo, others.

Hydroid DNC는 무선 블루투스를 이용하여 스마트폰과 NC기계 사이에 데이터를 주고 받을 수 있도록 개발된안드로이드 앱입니다.

Hydroid DNC는 화낙,비젼,마작,센트롤,도스낙,하스,한국산전 등 대부분의 공작기계를 지원합니다.


블루투스는 시판되는 산업용rs232 용 구입하여 사용합니다
케이블은 기존케이블사용합니다 9핀25핀의1번선을잘라서
통신합니다 (반드시)
스마트폰 기기마다 블루투스 페어링이 잘안될수 있지만
안되는기기는 없습니다 즉 블루투스 구입처에 문의
바랍니다 . 블루투스의펌웨어 에서 설정 하면됩니다.
공작기계측에는 25pin 이므로RS232통신 케이블과 블루투스 를 연결합니다. 그리고 스마트폰이나 태블릿 은아무연결을하지 않습니다. 즉 스마트폰 자체 블루투스 기능을 이용.통신 합니다. 그러므로 블루투스 는1개만필요 합니다.최장거리는 300미터 입니다.
항상 자료수신측에서먼저 수신준비되어야 합니다.
스마트폰 에서는 수신시는 통신설정이 필요없습니다
스마트폰 에서 전송시 1에서1000 구역내 통신속도
설정합니다 대채로200 정도로 합니다.
스마트폰 통신사가입 하고는상관이없습니다.즉 사용하지않은 스마트폰 으로도가능합니다. 단 별도로 구입가능합니다.
통신사 가입이 안되어 잇으면 결재가 불가하기때문입니다.
별도구입의자세한 사항은 Tel 010-2221-8938 로문자바랍니다. 복사하여 사용하는것은불가하며 비밀번호잇습니다.
----
개발자 연락처 :
문의 연락처 : 경남 창원 삼미엔지니어링
문의전화 : +821022218938

Hydroid DNC is theandroid application for sending or receiving DNC data usingwireless bluetoothe communication between smart device and NCmachine.
Hydroid DNC supports most of the machines, Fanuc, Vision, Mazak,Sentrol, Tosnac, Haas, Daewoo, others.

Hydroid DNC has developed an Android app to send and receivedata between a smart phone and NC machine using a wirelessBluetooth.

Hydroid DNC supports most machine tools such as Fanuc, vision,mahjong, senteurol, Dos camels, lotus, prenatal Korea.


Bluetooth is used to purchase a commercially available forindustrial rs232
 Track No 1 of the cable is cut, use existing cable 9-pin to25-pin
 The communication (always)
Every smartphone Bluetooth device pairing is good but should notbe
It should not contact the Bluetooth device that is dealer
Please. When Bluetooth is set in the firmware.
Since the machine tool side 25pin connect the RS232 communicationcable and Bluetooth. And your smartphone or tablet is not connectedto anything. That is its Bluetooth capability using smartphones.The communications. Therefore, Bluetooth requires only one. Thelongest distance is 300 meters.
Always it is prepared first data received from the receivingside.
The smartphone is not required when receiving the communicationsettings
1000 zone within the communication speed when transferring from onesmartphone
Set it to daechae 200 degrees.
Sign smartphones agency hagoneun not matter. That is not usedsmartphone eurodo possible. Only available for purchaseseparately.
It is because if the payment service provider to sign up in lessthan allowed.
For more details, please purchase a separate letter to Tel010-2221-8938. By using the password, and can not be copieditseupnida.

App Information Hydroid DNC for CNC MCT

  • App Name
    Hydroid DNC for CNC MCT
  • Package Name
    com.hydroid.android.BluetoothNC
  • Updated
    August 15, 2014
  • File Size
    Undefined
  • Requires Android
    Android 2.1 and up
  • Version
    1.1
  • Developer
    양애정
  • Installs
    10 - 50
  • Price
    $12.68
  • Category
    Productivity
  • Developer
  • Google Play Link

양애정 Show More...

Hydroid DNC for CNC MCT 1.1 APK
양애정
Hydroid DNC is the android application forsending or receiving DNC data using wireless bluetoothecommunication between smart device and NC machine.Hydroid DNC supports most of the machines, Fanuc, Vision,Mazak,Sentrol, Tosnac, Haas, Daewoo, others.Hydroid DNC는 무선 블루투스를 이용하여 스마트폰과 NC기계 사이에 데이터를 주고 받을 수 있도록 개발된안드로이드 앱입니다.Hydroid DNC는 화낙,비젼,마작,센트롤,도스낙,하스,한국산전 등 대부분의 공작기계를 지원합니다.블루투스는 시판되는 산업용rs232 용 구입하여 사용합니다케이블은 기존케이블사용합니다 9핀25핀의1번선을잘라서통신합니다 (반드시)스마트폰 기기마다 블루투스 페어링이 잘안될수 있지만안되는기기는 없습니다 즉 블루투스 구입처에 문의바랍니다 . 블루투스의펌웨어 에서 설정 하면됩니다.공작기계측에는 25pin 이므로RS232통신 케이블과 블루투스 를 연결합니다. 그리고 스마트폰이나 태블릿 은아무연결을하지 않습니다. 즉 스마트폰 자체 블루투스 기능을 이용.통신 합니다. 그러므로 블루투스 는1개만필요 합니다.최장거리는 300미터 입니다.항상 자료수신측에서먼저 수신준비되어야 합니다.스마트폰 에서는 수신시는 통신설정이 필요없습니다스마트폰 에서 전송시 1에서1000 구역내 통신속도설정합니다 대채로200 정도로 합니다.스마트폰 통신사가입 하고는상관이없습니다.즉 사용하지않은 스마트폰 으로도가능합니다. 단 별도로 구입가능합니다.통신사 가입이 안되어 잇으면 결재가 불가하기때문입니다.별도구입의자세한 사항은 Tel 010-2221-8938 로문자바랍니다. 복사하여 사용하는것은불가하며 비밀번호잇습니다.----개발자 연락처 :문의 연락처 : 경남 창원 삼미엔지니어링문의전화 : +821022218938Hydroid DNC is theandroid application for sending or receiving DNC data usingwireless bluetoothe communication between smart device and NCmachine.Hydroid DNC supports most of the machines, Fanuc, Vision, Mazak,Sentrol, Tosnac, Haas, Daewoo, others.Hydroid DNC has developed an Android app to send and receivedata between a smart phone and NC machine using a wirelessBluetooth.Hydroid DNC supports most machine tools such as Fanuc, vision,mahjong, senteurol, Dos camels, lotus, prenatal Korea.Bluetooth is used to purchase a commercially available forindustrial rs232 Track No 1 of the cable is cut, use existing cable 9-pin to25-pin The communication (always)Every smartphone Bluetooth device pairing is good but should notbeIt should not contact the Bluetooth device that is dealerPlease. When Bluetooth is set in the firmware.Since the machine tool side 25pin connect the RS232 communicationcable and Bluetooth. And your smartphone or tablet is not connectedto anything. That is its Bluetooth capability using smartphones.The communications. Therefore, Bluetooth requires only one. Thelongest distance is 300 meters.Always it is prepared first data received from the receivingside.The smartphone is not required when receiving the communicationsettings1000 zone within the communication speed when transferring from onesmartphoneSet it to daechae 200 degrees.Sign smartphones agency hagoneun not matter. That is not usedsmartphone eurodo possible. Only available for purchaseseparately.It is because if the payment service provider to sign up in lessthan allowed.For more details, please purchase a separate letter to Tel010-2221-8938. By using the password, and can not be copieditseupnida.
고려신학대학원 3.0 APK
양애정
고려신학대학원 홈페이지를 찾아주신 여러분을 환영합니다.고려신학대학원은 일제 강점기 말엽 일본 천황 이데올로기 강화를 위해 요구된 신사참배(神社參拜) 강요 앞에한국교회가무릎 꿇었을 때, 목숨 걸고 신앙의 정절을 사수했던 소수 신앙인들에 의해 시작된 신학교입니다.당시 교회가 신앙의 순결을 잃고 자유주의 신학사상에 물들어 가고 있는 상황에서, 신사참배 반대투쟁으로 옥고를치른고(故) 한상동, 주남선 목사에 의해 해방직후 1946. 9. 20에 부산에 개교되었고, 1998. 9. 4에천안으로캠퍼스를 이전하여 오늘에 이르고 있습니다.본교는 한국초기 평양신학교의 신학과 신앙을 계승하여, 정통 “개혁주의 신학” 및 한국적 개혁신앙과 영성전통인“생활의 순결”을 지향하는 신학교입니다.고려신학대학원은 대한예수교 장로회(고신) 총회직영 신학교이며, 행정적으로 고신대학교에 소속되어 있으나 역사적정통성유지를 위해 고유 명칭을 그대로 사용하고 있습니다.본교는 고신교회 목회자 후보생을 위한 목회학석사(M.Div.) 과정과 이후 과정인 신학석사(Th.M&Th.M in Ministry) 과정 및 선교전공을 위한 신학석사(Th.M. in Missiology) 그리고평신도지도자를 위한 문학석사(M.A. in Theology & M.A. in Missiology) 과정, 그리고목회자연장교육을 위한 계절학교인 목회대학원을 개설 운영하고 있습니다.오늘의 한국교회는 바른 신학, 바른 신앙, 바른 영성에 기초한 바른 목회를 통해 맘몬과 세속주의 우상 앞에무너진한국교회를 재건할 유능한 목회자를 찾고 있습니다.고려신학대학원은 한국교회 갱신과 세계선교를 위해 유능하고 신실한 목회자 양성에 최선을 다할 것입니다.우리 주님의 은혜와 평강이 늘 함께 하시기를 기원합니다.----개발자 연락처 :문의 연락처 : 경남 창원 삼미엔지니어링문의전화 : +821022218938Consider welcome youforvisiting the seminary website.Consider Theological Seminary is a seminary was started byasmall group of believers who, when the church Korea kneekneelbefore forcing a shrine (神社 參拜) required for the late EmperorofJapan during the Japanese occupation ideologicalreinforcement,risking his life in purity of faith shooter.At the time the church has faith in purity of losingliberaltheology in stained go that situation, Shrine struggle tookgo thetook high (故) hansangdong, state Namsun pastor byliberation 1946.9. 20 in Busan, the schools were, 9. 1998 beforethe Cheonan campusin April stands at today.Our school is a seminary for theology andfaith-orientedsucceeded initially in Korea, Pyongyang Seminary,authentic"Reformed theology" and "purity of life" Korean Reformedfaith andspirituality traditions.Consider Seminary and Presbyterian Church in Korea(Koshin)General Assembly direct the seminary, and administrativelybelongsto Kosin but still use its own name in order to maintainthehistorical authenticity.High school is a church theology for Master Master ofDivinity(M.Div.) Master of Theology course and after the course(Th.M &Th.M in Ministry) process for major missions andpastoral candidate(Th.M. in Missiology) and Master of Arts (MA inTheology & MAin Missiology) process and are offered anoperational season ofministry graduate school for continuingeducation for pastors layleaders.Church of Korea today are looking for the competent ministerstorebuild the church in Korea collapsed in front of the idolMammonand secularism through the right theology, right faith,rightministry based on proper spirituality.Consider Seminary will try our best to competent andfaithfulpastor training for church renewal Korea and worldmission. We wish you always with the grace and peace of the Lord.