xKaixRezza Apps

**[Update]- This edition of the plugin MUT For Torque v1 is now considereda legacy edition- A completely revamped edition of the plugin is released as MUTFor Torque v2 whereby it supports CANBUS Mode 23 and CANBUS Mode 21SST PIDs and extended sub-pids such as fuel consumption andinjector duty cycles for Hybrid MUT Over ISO9142-2- The revamped MUT For Torque v2 features a faster logging rate(dependent on amount of PIDs enabled through the plugin) with astandalone CSV logger and retains an option of "Legacy Mode" whereit functions similarly to MUT For Torque v1.MUT For Torque v2Playstore Link :https://play.google.com/store/apps/details?id=com.xkaixrezza.mutiiv2&hl=en**IMPORTANT FOR BOTH MUT FOR TORQUE V1 & MUT FOR TORQUE V2,TORQUE MUST BE ABLE TO CONNECT AND INTERFACE WITH THE ECU AS THEPLUGIN DOES NOT ADD FUNCTIONALITY TO CONNECT TO A MUT PROTOCOL ONLYECU****IMPORTANT BEFORE PURCHASING, THIS PLUGIN REQUIRES YOUR VEHICLETO BE COMPATIBLE WITH ISO9142-2 AND DOES NOT SUPPORT MITSUBUSHI'SON OTHER ISO PROTOCOLS***Note : This Plugin requires Torque Pro and a limited number ofECU's only.*Additional note : If your facing a "Unable to create importablefile error, please go to settings, unmount and remount your SDCard.Monitor specific Mitsubushi MUT requested parameters inreal-time, including advanced sensor data ie, Knockcount by addingthis plugin to Torque Pro.MUT FOR TORQUE s a plugin for Torque Pro, extending thePID/Sensor list with a number specific parameters from Mitsubushivehicles on the MUT protocol, including:* Knocksum* Various fuel trims (low, mid, high)* ECU Calculated Load* Airflow In Hz* Octane Level* EGR Temperatures*PLEASE NOTE* Note not all PID(s) are supported on all OBDIISupported Mitsubushi Models/ECU(s) depending on Sensor availabilityand such, the plugin was tested only on the followingmodels/engines :* Mitsubushi Colt Ralliart Version-R MT (Z27AG)KNOWN INCOMPATIBLE VEHICLES- Lancer [Evolution X Styling] (2007+)- Mitsubishi Lancer Evolution X (All Models)- Mitsubishi Lancer Evolution 1, 2, 3- Mitsubishi ASX (2010)- Mitsubishi Canter (2003)- Mitsubishi Carisma Diesel (2001)- Mitsubishi Colt 1.3L Petrol / Diesel (2006+)- Mitsubishi Colt Z30 (2006)- Mitsubishi Grandis (2005)- Mitsubishi L200 (2006)- Mitsubishi Outlander (2011)- Mitsubishi Outlander Instyle (2008)- Mitsubishi Pajero (All Models)- Mitsubishi Space Star Diesel (2001)-IMPORTANT-The plugin does not currently support the Evo X, Lancer EX/Fortis,OBDI ECU Models nor models which require mode 23.This is *NOT* a standalone application and will *NOT* workwithout Torque Pro.Plugin Installation-------------------------1) After purchasing the plugin on Google Play, make sure that yousee the plugin listed on your Android device installed applicationslist.2) Launch Torque Pro and click on the "MUT Plugin" icon3) Select "MUT II (Non-CAN)" and return to Torque Pro mainscreen4) Go to Torque Pro "Settings"5) Scroll down to "Manage extra PIDs/Sensors"6) Usually this screen will not display any entries, unless youhave added any pre-defined or custom PIDs in the past.7) From the menu, choose "Add predefined set" and select from thelist "MUT Import"8) After clicking on the entry from the previous step, you shouldsee several entries added to the Extra PIDs/Sensors list.Adding Displays------------------------1) After adding the additional sensors, go to the RealtimeInformation/Dashboard.2) Press the menu key and then click on "Add Display"3) Select the appropriate display type4) Select the appropriate sensor from the list. The PID(s) addedthrough this plugin would have a ''[MUT]'' prefix with thesensor/PID name and should appear on the top of the list.

This is *NOT* a standalone application and will *NOT* work withoutTorque Pro.*Important : Ensure that you are able to connect to the ecuthrough torque pro first as this plugin is using a hybrid MUT overISO9142-2 / Evo X Mode 23 / Evo X Mode 23 RAX Patch.Features- Mode 23 CANBUS PIDs (Evolution X) with RAX Patch Support- Mode 21 SST Transmission PIDs- Revamped Hybrid MUT v2 (For Faster Pooling Rates) & LegacyMUT For Torque v1 Support- Standalone .CSV Logger- Full Control Lock Over Torque Pro To Increase Pooling RatesMUT FOR TORQUE is a plugin for Torque Pro, extending thePID/Sensor list with a number specific parameters for Mitsubushivehicles on the MUT protocol, including :* Knocksum* Various fuel trims* ECU Calculated Load*PLEASE NOTE* Note not all PID(s) are supported on all OBDIISupported Mitsubishi Models/ECU(s) depending on Sensor availabilityand such, the plugin was tested only on the followingmodels/engines :* Mitsubishi Colt Ralliart Version-R MT (Z27AG) - MUT Hybrid(Legacy & v2)* Mitsubishi Evolution X - Mode 23 & Mode 23 RAX Patch (NoteCANBUS MUT is not supported)- KNOWN INCOMPATIBLE VEHICLES-The Plugin Has Been Reported That It Will Not Work On The FollowingVehicle(s)- Mitsubushi Pajero 3.2 B Pre 2006*If Users are purchasing this plugin for CANBUS Mode 23 / RAXPatch operational mode, do ensure that your vehicle has mode 23 ora RAX patched rom enabled as the Plugin by default was configuredfor Evo X Rom ID : 59590004 (With RAX Patch), configure the PIDsfor your rom after installation through the Plugin Settings.*Additional note for users using the Legacy Mode For MUT: Ifyour facing a "Unable to create importable file" error, please goto settings, unmount and remount your SD Card.-IMPORTANT-The plugin does not currently support vehicles which require CANBUSMUT logging, this plugin requires the MINIMUM of Mode 23 to beENABLED.= How Do I Achieve Faster Refresh Rates ? =- Enable full control via settings 'Toggle Adapter FullControl'- Reduce the amount of PIDs being enabled via 'Enable / DisablePlugin PIDs For Current Mode'Plugin Installation (For Mode 23 & Hybrid MUT v2 & RAXPatch)-------------------------1) After purchasing the plugin on Google Play, make sure that yousee the plugin listed on your Android device installed applicationslist.2) Launch Torque Pro and click on the "MUT v2" icon3) On First Launch It Should Prompt You To Select The Mode OfOperation4) Allow Torque Pro To Connect To The ECU5) The PIDs should be added directly to Torque Pro6) For Mode 23 Users, Ensure that the Mode 23 PIDs are for your romvia settings.7) Enable / Disable The PIDs and configure their displays throughthe plugin as Torque will not save the added configuration data dueto limitations.8) The Plugin must be launched after Torque Pro has loaded up withthe ECU connected to load up the PIDs else Torque would display thePIDs as ExtPID and would refuse to update the data.Plugin Installation (For Legacy Hybrid MUT)-------------------------1) After purchasing the plugin on Google Play, make sure that yousee the plugin listed on your Android device installed applicationslist.2) Launch Torque Pro and click on the "MUT v2" icon3) On First Launch It Should Prompt You To Select The Mode OfOperation, Select Legacy Mode4) Go Back To Torque Pro's Main Screen And Go Into Settings AndManage Custom PIDs5) Import The PID Set Into Torque Pro6) Editing Of Legacy Added PIDs Are Done Through Torque.Adding Displays------------------------1) After adding the additional sensors, go to the RealtimeInformation/Dashboard.2) Press the menu key and then click on "Add Display"3) Select the appropriate display type4) Select the appropriate sensor from the list. The PID(s) addedthrough this plugin would be in the same name of the Plugin's PID'stitle as the prefix with the sensor/PID name and should appear onthe top of the list.