Sleep soundly with the most advanced anchor alarm for Android.

Anchor App. For Sail and Power Boats. Peace Of Mind while atAnchor.

Charge Flamingo scooters in Wellington, Auckland, Christchurch

Sailsafe is an application designed to increase safety in theanchoring of small and medium-sized ships. It lets you stablish asafety zone around your anchor and activate an alarm that willalert you in case your ship leaves that zone at any given time(very common situation when anchor drifting occurs or the chainbreaks). You will be able to see where the boat is located on themap at any moment, which is very useful if it is dark or visibilityis reduced. The safety zone can be set just indicating a radius. InPRO version, you can also specify an aditional exclusion zone todetect, for example, changes in wind direction that could put ourboat at risk if, for example, the coast is positioned itself toleeward. Sailsafe has been designed to maximize the safety afteranchoring. Therefore, once the alarm is activated, not only theposition of the ship is checked, but also the level of the batteryin the mobile device or the state of the GPS signal. If any ofthese parameters fails, then the app will produce an audible alarmto inform about the specific problem. Thus, after setting the alarmyou can relax and trust Sailsafe. It will be watching for you.IMPORTANT: Recent Android versions may stop the alarm when thedevice is idle (screen off) to save battery. To avoid this, go tobattery settings and, at the end, add Sailsafe to the unmonitoredapps list (this option might change depending on the Androidversion). Also check that you are not using any battery saving modein your device. Features: - It runs in the background. - Mainscreen shows useful information: 1. Current position (latitude,longitude and accuracy of the measure). 2. Current security radius.3. Current drift. - Set graphically and easily a security zone withan optional exclusion zone. - Wind forecast included (48h). Youwill be warned if the boat is expected to be out of the securityzone due to a wind change. - The ship and the security zone arealways shown over a map with optional satellite view. - Once thealarm is set, you can adjust the anchor position in case it is notcorrect. Just indicate the actual bearing (read it from thecompass) and estimated distance between the ship and the anchor(surface distance). - Option to ignore the current volume of thedevice and set it to the max when the alarm is triggered. - Optionto set a minimum battery level. When reached, the alarm istriggered. - Option to allow automatic alarm re-launch after afalse positive. - Option to keep the screen on while the alarm isactivated. - Option to call a phone number when the alarm istriggered. - Remote commands: 1. An incoming call from a definedphone will reset the alarm. 2. Send a SMS with the word STATUS tothe on board device and it will respond with another SMS containinguseful information about the location of the ship. - After a setnumber of seconds without GPS signal, the alarm is triggered. -Option to mute alarm tone after a set number of minutes (to avoidannoying pets in the boat if the alarm is triggered and nobody ison board). - Option to set the measurement unit (feet or meters). -Three modes of operation: 1. Normal. GPS readings every 10 seconds.Simple algorithm to discard odd positions. (Save battery when thedevice is not charging). 2. Fine. GPS readings every 2 seconds.Complex averaging algorithm based on accuracy and time of the last10 GPS readings to discard odd positions making the whole systemsmooth and robust. More power consumption. 3. Continuous. GPSreadings every 1 second. Same algorithm as in fine mode. Optimusfor adverse weather conditions. More power consumption. 4. Poor GPSsignal mode. - When re-enabling alarm, if ship moved less than 150meters, you can opt between keeping last anchor position (usefulafter a false alarm) or using the actual GPS reading.

Use Dawn Chorus to wake up to the sound of birds each morning.

30 Whole Days is now Whole Eats - to cater to ALL your whole eatingneeds.

Sailsafe is an application designed toincrease safety in the anchoring of small and medium-sizedships.It lets you stablish a safety zone around your anchor and activatean alarm that will alert you in case your ship leaves that zone atany given time (very common situation when anchor drifting occursor the chain breaks). You will be able to see where the boat islocated on the map at any moment, which is very useful if it isdark or visibility is reduced.The safety zone can be set just indicating a radius.In PRO version, you can also specify an aditional exclusion zone todetect, for example, changes in wind direction that could put ourboat at risk if, for example, the coast is positioned itself toleeward.Sailsafe has been designed to maximize the safety after anchoring.Therefore, once the alarm is activated, not only the position ofthe ship is checked, but also the level of the battery in themobile device or the state of the GPS signal. If any of theseparameters fails, then the app will produce an audible alarm toinform about the specific problem. Thus, after setting the alarmyou can relax and trust Sailsafe. It will be watching foryou.Features:- It runs in the background.- Main screen shows useful information:1. Current position (latitude, longitude and accuracy of themeasure).2. Current security radius.3. Current drift.- Set graphically and easily a security zone with an optionalexclusion zone.- Wind forecast included (48h). You will be warned if the boat isexpected to be out of the security zone due to a wind change.- The ship and the security zone are always shown over a map withoptional satellite view.- Once the alarm is set, you can adjust the anchor position in caseit is not correct. Just indicate the actual bearing (read it fromthe compass) and estimated distance between the ship and the anchor(surface distance).- Option to ignore the current volume of the device and set it tothe max when the alarm is triggered.- Option to set a minimum battery level. When reached, the alarm istriggered.- Option to allow automatic alarm re-launch after a falsepositive.- Option to keep the screen on while the alarm is activated.- Option to call a phone number when the alarm is triggered.- Remote commands:1. An incoming call from a defined phone will reset thealarm.2. Send a SMS with the word STATUS to the on board device and itwill respond with another SMS containing useful information aboutthe location of the ship.- After a set number of seconds without GPS signal, the alarm istriggered.- Option to mute alarm tone after a set number of minutes (to avoidannoying pets in the boat if the alarm is triggered and nobody ison board).- Option to set the measurement unit (feet or meters).- Three modes of operation:1. Normal. GPS readings every 10 seconds. Simple algorithm todiscard odd positions. (Save battery when the device is notcharging).2. Fine. GPS readings every 2 seconds. Complex averaging algorithmbased on accuracy and time of the last 10 GPS readings to discardodd positions making the whole system smooth and robust. More powerconsumption.3. Continuous. GPS readings every 1 second. Same algorithm as infine mode. Optimus for adverse weather conditions. More powerconsumption.4. Poor GPS signal mode.- When re-enabling alarm, if ship moved less than 150 meters, youcan opt between keeping last anchor position (useful after a falsealarm) or using the actual GPS reading.

SEB's banking app is for you who are a client of SEB IPB orSEBLuxembourg

A Softphone for voice/video calls, meetings hosted in Zain Cloud inKSA.

Theory tests, practice road signs, search for driving instructors

RealGamepad is a virtual joystick to play your PC games with yourSmartphone.

Join us and unlock an unusual experience!

Play Roulette Casino City and let us set off fireworks for yourvictory

AW Player is powerful video player with advanced features andsubtitle support.

Truck Simulator Vietnam (TRUCKSVN) The first unique truck game inVietnam