MobileTech helps Alarm.com Authorized Dealers install andtroubleshoot systems.

Emergency Management Platform and Geographic Resource Monitoring

NOTE:This app requires a compatible security system and an interactiveMyAlarm service plan to function.Contact your MyAlarm Registered Installer to discuss plans andoptions before purchasing the app.DESCRIPTION:The MyAlarm iFob Control app provides real time control andfeedback of compatible, IP enabled alarm systems.Reporting of alarm events via Push notification and email is alsoavailable if required.Users can arm and disarm areas, control outputs and doors, viewsystem troubles and alarm system history as required.All events performed via the app are recorded in the system historylog.App users are required to use their normal alarm PIN when using theapp allowing the alarm system to restrict the user to onlyfunctions, areas and doors they have access to. Multiple sites aresupported allowing easy interface to your home, office and holidayhouse etc if required.Once on a MyAlarm service plan the system owner can create anaccount on the www.myalarm.com.au web site, where they can assignaccess for up to 10 iFob users for each alarm system. Various appfunctions can be restricted by the system owner if required givingthem total control.If you are in doubt how to set these options contact your MyAlarmregistered installer for assistance.COMPATIBILITY:The iFob app is currently only compatible with the panels listedbelow.Most older version panels can be upgraded to meet the firmwarerequirements by your alarm installer.If you do not have one of the systems listed then do not downloadthe app.PANELS:* Bosch - Solution 144 Alarm Panel (via firmware upgrade toSolution 6000 v2.23 and higher)* Bosch - Solution 6000 Alarm Panel (v2.23 and higher)* Digiflex - Vision-X Alarm Panel (v2.23 and higher)IP CONNECTIVITY OPTIONS:* CM751 Ethernet module (v2.16)or* CM744 3G Radio moduleor*CP740 WiFi Enabled Graphic KeypadREQUIREMENTS:For the iFob Control app to function your system needs to meet thecompatibility requirements listed above.Your system needs to have been installed and configured for MyAlarmservices and you will need to sign up for a MyAlarm service planwith your installer.A MyAlarm Customer account is required to setup the iFob Controlapp users for your system.Contact your MyAlarm installer for more information regarding youralarm system configuration and MyAlarm service plan options.

App for any alarm system. Notifications and remote control.

Send message with MQTT when alarming and turn on your smart homewhen waking up!

Guardhat Safety & Inspection Manager is a workplace safetyaudit software system

MQTT Alarm Control Panel Reuse and old Android devices as ahomealarm control panel that integrates with Home Assistant or anyhomeautomation platform that supports MQTT messaging. MQTTAlarmControl Panel is an alarm control panel for use withhomeautomation platforms that support MQTT messaging. Theapplicationwas originally built for Home Assistant'sMQTT ManualControl Panel.However, the application can be used with any homeautomationplatform that supports the MQTT messaging protocol suchas Jeedom,openHab, or Node-Red. The alarm control panel acts as aninterfacefor your home alarm system and allows for two waycommunicationusing MQTT. You can set the alarm state to away orhome, or disarmthe alarm using a code. Your home automation systemcontrols thesensors or automation that triggers the siren ornotifies users ofpossible intrusion. Features * Stream video,detect motion, detectfaces, and read QR Codes. * Capture andemailing images when thealarm is disabled. MQTT commands toremotely control theapplication (speak text, play audio, displaynotifications,alerts). * Device sensor data reporting over MQTT(temperature,light, pressure, battery, etc.). * Day/Night modethemes based onMQTT sun value. * Fingerprint unlock support todisable the alarm.(on supported devices). * Optional screensavermode using a digitalclock or Imgur images. * Three day MQTT Weatherforecast. * HomeAutomation Platform webpage support for viewinghome automationdashboards. The alarm panel is designed to be usedas a dedicateddevice which runs continuously in full-screen mode.The alarm panelis open source and available on GitHub. There isalso a versionthat runs on a Raspberry Pi using Android Things Forthe completesetup instructions and additional information, pleasevisit theProject Home Page. If you have any questions, please visittheThanksmister Community. Home Assistant Home Assistant's MQTTManualAlarm Control Panel Project's Home Page Raspberry PiVersionThanksmister Community Support: [email protected]

Vigicontrol is a system for controlling security guard toursthrough online monitoring. This useful tool executes the completecontrol and auditing of security guard actions: position reportthrough GPS, sending of Alive alerts, reports incidences whichoccur during the route, sending of images captured with thesmartphone camera, all of these features and many more areavailable for your online monitoring center, 24 hours a day and all365 days of the year. The application has four main buttonsavailable: SOS - ROUTE - ALIVE SIGNAL - NEWS - ASSIGN SOS: AllowsPanic events to be sent with position information and the option tosend an image. Alive: This is a presence control. It operates byactivating a button every determined period of time which must bepressed to cancel the alarm. If this button is not actuated withinthe determined time period, an alert will be generated for themonitoring center. Tour: Allows the guard to send an ARRIVAL orDEPARTURE event whenever he returns or leaves his post, this isalso used when the guard passes through his route control points.This event will be received with date, time and positioninformation. News: Allows the guard to update monitoring centerinformation, allowing information such as Images, QR Codes, text orvoice notes and calls to be transmitted. VigiControl is anapplication which uses multiple communication methods to assurethat alerts are sent, the most common method is TCP/IP, thisincludes WiFi and cellular data networks (GPRS-LTE), SMS sending isalso used when the data network is unavailable. ATTENTION: • Onlyuse the SOS option during real emergency situations. (A test buttonis available to verify that it operates correctly) • Depending onthe user’s location, it is possible for satellite positioning to bedelayed or unavailable. Regardless, the alarm that was sent willreach its destination. • VigiControl only operates when connectedto an electronic monitoring service provider’s server. • Theapplication is currently available in the following languages:English, Spanish, Polish, Portuguese. More languages will beavailable soon.

Control and manage your Verisure Smart Alarm from your AndroidPhone

App of integral management of technicians and installers ofsecurity companies

SEB's banking app is for you who are a client of SEB IPB orSEBLuxembourg

RealGamepad is a virtual joystick to play your PC games with yourSmartphone.

Play Roulette Casino City and let us set off fireworks for yourvictory

Andar Bahar (sometimes referred to as Katti) is a traditionalIndian game.

Truck Simulator Vietnam (TRUCKSVN) The first unique truck game inVietnam

AW Player is powerful video player with advanced features andsubtitle support.

Do you want to Drive on the Real World Map with 70 Hairpin Bends?Download This!

A Softphone for voice/video calls, meetings hosted in Zain Cloud inKSA.