1.9 / December 29, 2016
(4.0/5) ()

Description

What's My Trail is three apps in one.

1. What's My Trail? will calculate the trail of your road ormountain bike. Enter your wheel size, the angle of the head tubeand the fork offset/rake and the app calculates the trail. If youhave a mountain bike with front suspension, the head tube angle,wheelbase and trail change as the fork compresses. If you enter thewheelbase, axle to crown height (also called ride height) and theamount of travel the fork has the app will calculate the change intrail, head tube angle and wheelbase.

2. What's My Cadence? Will calculate your Cadence (crank RPM) ina give gear, wheel diameter and speed. You can set the number ofteeth on the front and rear chainring/cog, set your wheelscircumference and speed. What's My Cadence also shows you theinches and meters of development with each turn of the pedals.Speed is in both MPH and KMH.

3. Air Spring. This part of the app you enter information aboutyour suspension fork. The app will calculate the air pressure andvolume changes on both the positive and negative side of the pistonduring travel. It also calculates the force to get to SAG and fulltravel.

App Information What's My Trail and Cadence?

  • App Name
    What's My Trail and Cadence?
  • Package Name
    appinventor.ai_mwoodhouse.WhatsMyTrail
  • Updated
    December 29, 2016
  • File Size
    Undefined
  • Requires Android
    Android 1.6 and up
  • Version
    1.9
  • Developer
    MachinistApps
  • Installs
    500 - 1,000
  • Price
    Free
  • Category
    Tools
  • Developer
  • Google Play Link

MachinistApps Show More...

Turning Time 11 APK
MachinistApps
Turning Time is now 5 Apps in one.TURNING TIME: Calculates the number of passes and amount of time ittakes to remove material when turning. It will also convertsdiameters, lengths, speeds and feeds from inch to metric and metricto inch. To use Turning Time enter the start diameter, finishdiameter and length of cut. Next, enter your cutting parameters andpress the Calculate button. Turning Time will convert your inch ormetric data and display the number of passes, the time required toremove the material, amount of material removed, the removal rate,the maximum and minimum RPM and maximum IPM and MMPM feedrate. Alsocan set Max RPM (G50).TRUE POSITION: Will calculate the true position of a hole and showthe MMC.Ra FINISH: Calculate the surface finish you will get with a knowncorner radius and feedrate/step over. Also shows the scallopheight.DRILL TIME: Calculate the time to drill a number of holes. Show theRPM and Feedrate in IPM. Show the drill point length. Also showsthe amount of material removed and the material removal rate.3 POINT CIRCLE: If you know the XY position of 3 points the appwill calculate the center of the circle and the diameter.TAPPING: Calculate time to tap holes, RPM and Feed per Minute andper Rev.Inch and Metric. Enter the percent of thread and the appwill tell you the drill size.
What's My Trail and Cadence? 1.9 APK
MachinistApps
What's My Trail is three apps in one.1. What's My Trail? will calculate the trail of your road ormountain bike. Enter your wheel size, the angle of the head tubeand the fork offset/rake and the app calculates the trail. If youhave a mountain bike with front suspension, the head tube angle,wheelbase and trail change as the fork compresses. If you enter thewheelbase, axle to crown height (also called ride height) and theamount of travel the fork has the app will calculate the change intrail, head tube angle and wheelbase.2. What's My Cadence? Will calculate your Cadence (crank RPM) ina give gear, wheel diameter and speed. You can set the number ofteeth on the front and rear chainring/cog, set your wheelscircumference and speed. What's My Cadence also shows you theinches and meters of development with each turn of the pedals.Speed is in both MPH and KMH.3. Air Spring. This part of the app you enter information aboutyour suspension fork. The app will calculate the air pressure andvolume changes on both the positive and negative side of the pistonduring travel. It also calculates the force to get to SAG and fulltravel.
Milling Calculator 13 APK
MachinistApps
Milling, Drilling, True Position, Surface Finish, 3 Point Circleand Tapping.
Ad Invader 1.6 APK
MachinistApps
Ad Aliens are coming to steal your data. Stop them before it's toolate!