Top 40 Apps Similar to TCP Client
Modbus Monitor Advanced
Android Modbus Master/Client andSlave/Serverfor phones and tablets. The Modbus Monitor utility issimple buthave many advanced features unmatched even by PC basedstandards.This is the only Modbus App in the Android store withthree Apps inone!!! (Modbus Master, Modbus Server, and SensorsServer in ModbusTCP).> Modbus Channels: Bluetooth, Ethernet, Wi-Fi, RS232/485USBSerial ports (check compatibility below)> Protocols: Modbus TCP, Enron/Daniels TCP, Modbus RTU overTCP,Modbus UDP, Modbus RTU over UDP, Modbus TCP Slave/Server,ModbusRTU, Modbus Serial ASCII> Sensor Server: Read your phone's sensors (Gyro, GPS,*CellPhone Tower, etc.) remotely with built-in ModbusSensorServer> *Log or Export Data: Log Register values to your privateGoogleSpreadsheet!!! Great for Cloud Storage from multipledevices. Alsoexports register values in CSV file to device's localstorage. >Import/Export: CSV format from Internal/ExternalMemory orEmail> Languages: German, Spanish, French, Italian, Japanese,Polish,Russian, and Chinese> Modbus Functions: FC1, FC2, FC3, FC4, FC5, FC6, FC15,FC16,Write Auto Pick> Allows "Simple" (6 digit Input) or "Advanced" (fullmodbus)input modes> *Simple push to write feature that allows writing pre-setvalueat the push> *Convert Modbus Integer Values to Text (Coded Message orStatusConverter)> Data Conversion: Unsigned, Signed, Hex, Binary, Long,Double,Float, String, BCD formats, Unix Epoch Time, PLCScaling(Bipolar/Unipolar Analog ADC value conversion)> Pro Tuning Options: Interval, Inter-Packet Delay,Link-Timeout,Actual RX/TX Counts, Baud Rate, Stop Bits, DataBits,Handshaking> Bluetooth Requirement1. Your device must have Bluetooth Radio that supports SPPprofile(RFCOMM Secure or Insecure)2. See "ModbusMonitor.com" or email [email protected] below for hardware requirements> USB-to-Serial Port Requirement, USB OTG SerialPorts>>RS232/422/RS485Your device must meet all of the THREE requirements.1. Your device must be Android version 3.2 or newer2. Your device must support USB Host or OTG interface3. Your USB-to-Serial Port dongle must contain one offollowingchipsets: >FTDI [FT230X, FT231X, FT234XD, FT232R, orFT232H],Prolific [PL2303HXD, PL2303EA, or PL2303RA], SiLab[CP210x],QinHeng CH34x4. RS485: Tested with "no echo" setting turned ON.More: www.modbusmonitor/guide/serialport> Feedbackwww.ModbusMonitor.com contains online form in “Feeback” sectionforthose who are interested providing constructive feedback orfeaturerequest.> Help- www.modbusmonitor.com/help- email: [email protected]
StayLinked SmartTE Terminal Emulation Client 15.02.0220
StayLinked Smart TE is the only Terminal Emulation(TE)productspecifically designed for wireless environments.TraditionalTEsolutions are, by the nature of their architectureandtransportlayer, incapable of dealing with thereal-worldinconsistencies ofboth Wifi and Cellular wirelessnetworks.StayLinked TE deliverssecure, high-speed terminalemulation whilecompletely eliminatingthe major productivity killer- droppedsessions. With its uniquethin-client architecture,StayLinkedallows mobile devices toconnect to emulation host systemswithindustry-leadingperformance, connection/session reliability,anddata security.Centralized help desk and tech staff benefit fromtheincludedStayLinked Administrator management console.SmartTEeasilyconverts your "Green Screen" applications tointuitive,modern,graphical apps. With StayLinked SmartTE you getthe best ofbothworlds with No-Risk application modernization. DEMOMODE:Thisversion includes the ability to easily connect totheStayLinkeddemonstration server and interact with alivehost-basedapplication. REQUIREMENTS: If you are notcurrentlyrunning therequired StayLinked Server, pleasecontactStayLinked.com or yourpreferred StayLinked Reseller toarrange fora free evaluation.What's New in the SmartTE AndroidClient: •Support for theHoneywell Pre-Licensed CK 65 Gen 3 AlphaNumeric •Support for theHoneywell Pre-Licensed CK 65 Gen 3 NumericOnly •Support for theBlueBird EF550 device • Support for theBlueBirdVX500 device Forthe latest software releasenews,visit:https://www.staylinked.com/latest-release FEATURES•TerminalEmulation over Wi-Fi or cellular connections •Barcodescanningthrough iDevice camera or connected 3rd partyscanners/cardreaders• Wireless IP printing support • StayLinkedServer softwarerunsnatively on the most reliable server OSplatforms, includingIBM i(AS/400), AIX, HP-UX, Sun, SCO, Linux, andWindows Servers•Supports IBM 5250/3270, VT220/100/420/52 andSSHv2terminalemulation • Security - All Telnet or SSHv2communicationstakeplace on the host machine and are never broadcastover thewirelessnetwork. With Blowfish encryption,firewall-friendlydesign,application lock-down, and support for portfilter andaccess-listcontrols, StayLinked ensures the integrity ofyour dataandcommunications. • Advanced Session Management -StayLinkeddeliversfull management of all aspects of telnet sessionson themobiledevice, configuration, and licensing. StayLinkedeliminatestheneed to purchase additional software tomanagesoftwaredistribution, client configuration,barcodeconfigurations,keyboard maps, scripting, screenreformatting, filetransfers,session transfers, device reboots,diagnostics, and more.•Comprehensive Help Desk Toolset - Featuresinclude the abilitytofully remote control or observe a live telnetsession,rundiagnostics on the mobile device, collect log files,sendtextmessages to the device, restart the client software,re-bootthemobile device, change device configurations, executecommands,runprograms, manage licenses, collect usage data, andmore. •TheClient2Host protocol is very efficient, onlytransmittingdataacross the network on the demand of the client. UDPalso avoidstheIP traffic and connection issues that are inherent intheTCPprotocol and exacerbated in a wireless environment•Allconfiguration and licensing is controlled viaacentralizedmanagement console • Transferableconcurrent-userterminalemulation licensing.
RESTask for Tasker
Opt in for betatesting:https://play.google.com/apps/testing/com.freehaha.restaskThis is a Tasker plugin providing alternative interface toaccessRESTful APIs (targeting GET, POST, PUT, DELETE).This app is intended to work as a plugin to Tasker and doesnotprovide a launcher icon so one must have Tasker installed inorderto utilize this application.*README*Variables can be set synchronously or asynchronously.With the default sync setting, the task will wait until therequestis finished or is timed-out before executing the next taskand youwill be able to set the return code/response to localvariables.Note that in synced mode you can only set localvariables, i.e.,variables with all lower-cased letters, this is alimitation oftasker API.However, in async mode, the task will finish immediately and workinthe background so you will not be able to set local variables init(you can still use local variables for the parameters andstuff).With this mode, you can only set global variables as localvariableswill not be accessible to other tasks. Following is howto enablesetting global variables in async mode:1. To enable global variable set, you have to enable 'AllowExternalAccess' in Tasker ( menu -> preference -> misc ->AllowExternal Access')2. Return variables name should be global (with at least onecapitalletter) because it is set asynchronously in a differenttask andwill not be accessible if it is set as a localvariable.3. Since the request is performed asynchronously,returnedcode/response might not be available immediately. If youwant tocapture the returned code/response, you can set an action to'WaitUntil' the variable 'is set'. But remember to clear thevariablebeforehand because these variables are global and willremain aftertasks finished..---CookiesThe cookies will be found in the %hdr_set_cookie variable ifyourresponse header variable prefix is set to %hdr. If therearemultiple Set-Cookie headers they will stored in the samevariableseparated by newlines.---Feel free to leave comments or send email to me if you haveanysuggestions to improve this application.Special thanks to Arno Puder for helping me test the app.
DivIP ★ VLSM, SUBNET, IP, IOS 2.2.0
#1 networking calculator and Cisco IOS configurationtool----------"DivIP is a networking application designed to fitallnetworkadministrators and students. It provides a simple methodtodivideIP address (both IPv4 and IPv6), performsubnetting,supernetting,VLSM, calculate IGRP/EIGRP metric and manyotherfeatures." FEATURESOVERIEW • IP: Divide IPv4 and IPv6 •CIDR:Display information aboutsubnet mask and wildcard mask •SUBNET:Perform subnetting for bothIPv4 and IPv6 • SUPERNET:Performsupernetting (prefix aggregation,route aggregation orroutesummarization) • VLSM: Perform subnettingby VLSM technique•METRIC: Calculate metric for IGRP and EIGRP •BASE NUMBER:Convertbetween 4 number systems (binary, octal,decimal andhexadecimal) •EUI-64: Convert MAC address into EUI-64MAC andLink-local IPv6address • CCNA: Cisco Certified NetworkAssociate(CCNA)Configuration ADVANTAGES • No ads • All usefulfeatures in oneapp• Good looking design • Easy to use, fast toenter input data andareliable app • Provide help inside app(step-by-step and video)•Multi-platform (now available forWindows, Android and Nokia X)•Save on upgrade LANGUAGE • العربية •English • Español • French•Nederlands • Tiếng Việt PLATFORMS DivIPnow available forWindowsPC, Android and Nokia X. Take a look onDivIP for WindowsPC:http://goo.gl/26UezM Upgrade DivIP toDivIP+:http://goo.gl/utPjMD-------------------------------------------•If you love DivIP,please rate and share it. • You can help mebypurchase DivIP+,translate DivIP to your own language orjointesting group. I'mtrying to make DivIP better and better. Ifyouhave any problems orsuggestions, please do not hesitate tocontactme([email protected]). Thank you!
TrackAbout 2.288.544
TrackAbout is a cloud-based asset trackingandmanagement system. We help companies around the world optimizetheuse of millions of physical, portable, returnable andreusablefixed assets.PLEASE NOTE: This is a B2B app and is intended only forcustomersof the TrackAbout asset tracking ecosystem. You will needaTrackAbout account to log in.TrackAbout provides physical asset tracking,includingspecialties such as:• compressed gas cylinder tracking• durable medical equipment and home medicalequipmenttracking• chemical container tracking• keg tracking• IBC tote tracking• roll-off container tracking• small tool trackingTrackAbout’s customers include Fortune 500 companies as wellassmall, independent operators.This app enables users to perform asset tracking operationsbyscanning barcodes using the smartphone's camera and,optionally,collecting the assets' GPS location using thesmartphone's locationservices.Internal users can use the following actions and features:• Add New• Create Order• Customer Audit• Delivery (basic)• Fill• Find Inventory• Load/Unload Truck• Locate• Maintenance• Reclassify Assets• Replace Barcode• Return Assets• Vendor Receive• Search for assets by tag and view asset details and history• Dynamic FormsFollow-On Tracking® users can use the following actionsandfeatures:• Move Asset• Set Volume• Search for assets by tag and view asset details and historyCompatibility:• This app requires Android 4.1 or higher.Explanation of the permissions requested by TrackAbout:• Location - access device location via GPS to determinewhereassets are when scanned• Camera - access your camera to scan barcodes
HMI Modbus TCP, Bluetooth Free 2.14
This software can be used as replacement for HMI operatorpanel.Somefunctions of Scada-systems such as reading andwritingdifferent datatypes are provided. Modbus TCP/IP protocolissupported. In order touse Modbus RTU/ASCII additionalModbusconverter (for exampletgw-715) is necessary. If youneedonlyviewer:https://play.google.com/store/apps/details?id=net.sagram.hmi_modbus_viewer.Manual:https://drive.google.com/drive/folders/0B_ogMSvuFCPAcUgyZURYaDF1ZTg?usp=sharingAlsoimplementedcommunication through Bluetooth (Modbus RTU), canbeused forcommunication via Bluetooth shield for Arduino andotherdevices.Viewing requests and responses in Hex format in thelog.Programinterface is based on Drag and Drop principle. Longtap onelement inediting mode is used to move that elementwithinworkspace. Mostexternal HMI are using port no. 8000, PLCportusually set to 502.Read/write functions currently supports Int16,Int 32, Float, Floatswapped, Boolean data types. Softwarewastested on HMI panel WeintekMT6070iH, Delta DVP20EX2 PLC,Siemenss7-1200 PLC
Traccar Manager 2.2
Traccar Manager is a mobile applicationtomanage GPS tracking devices. It requires a Traccar serverinstanceto work.By default application is configured to use free demoTraccarservice. To manage devices you need to register useronhttp://demo.traccar.org/.Traccar (Server) is a free open source server that supportsmorethan 100 different protocols and GPS tracking devices. You canusethis application with your own hosted instance of Traccar. Formoreinformation visit https://www.traccar.org/.
Remotix VNC RDP Remote Desktop
Remotix is a fast & secure remotedesktoptool to access your computer from anywhere via VNC andRDP.General Features• Apple Screen Sharing, VNC and RDP, including RD Gateway• Connect from anywhere to any computer with RemotixCloudtechnology;• Automatic clipboard synchronization• SSH tunneling with both password and public key auth• Discover all nearby machines using Bonjour, NetBIOS andLANscanners• Wake-On-LAN• Uses hardware accelerated renderingControl Interface• Full set of multi-touch gestures to pan, zoom, drag, rightclick& scroll• Point-and-click or touchpad-mode remote desktop control• Hardware and bluetooth keyboard support• Complete international character input• Extended keyboard to access copy/paste, function andnavigationkeys• Take and share the screenshots of the remote machineIf you are connecting to Windows:• RD Gateway & load-balancing configurations• Sound playback & recording• Your device filesystem redirection• Network speed autodetection for the best performance over 3GorLAN• Secure NLA authentication• RDP over SSHIf you are connecting to a Mac:• Five quality modes, including adaptive for average andslowInternet connections• Multi-display configuration selection, combined or eachdisplayindividually• VNC Password and Mac OS X authentication methods• Server-side picture scaling, improving interaction speed• Easy multi-language keyboard input using "KeyboardthroughClipboard" mode• Remote screen locking• Access to hidden dock or menuIf you are connecting to Windows or Linux over VNC:• Tested and works well with UltraVNC, TightVNC, RealVNC,VMWare,TigerVNC and x11vnc servers• TLS encryption and VeNCrypt authentication (ProxMox&TurboVNC)• UltraVNC Microsoft Windows Logon authentication• x11vnc -ncache mode support
