Allows you to control a Chauvin-Arnoux PEL 102/103/105 from anAndroid device.

This Android application is designed to work with the F407 and F607Chauvin-Arnoux power harmonics clamps and the AEMC Instrumentsmodels 407 & 607, this gives you the remote clamp's screen andkeyboard. We can then: - view the measurements in real time, -recover the stored files of recorded data, - export them in ICP,Excel or CSV format, - view the trend curves on the screen. Theseare features available on the power clamp instrument. We have addednew features: - Real-time recording of several parameterssimultaneously (AC and DC, etc.), - Real-time display of all theharmonics at the same time. This app works with clamps firmware2.06 and higher. Contact your local representative if upgrade isneeded.

ScopeNet is the result of an investigation by Chauvin ArnouxResearch Laboratory. It enables you to view live waveforms, performmeasurements and analyses, capture instrument screenshots andcontrol METRIX oscilloscopes from your tablet or phone. The purposeof this Application is to monitor waveforms and measurements on aOX7000, OX6000B or MTX105X METRIX oscilloscope series with anEthernet connection. The application is designed to work withoscilloscopes whether they have already been configured with DHCPor not. In order to connect to an oscilloscope, the "Socket Server"on the oscilloscope has to be started up and the port must be setto 5000 ScopeAdmin and 5010 ScopeNet. The application providestotal control over the oscilloscope such as viewing measurementsand starting/stopping acquisitions. The application does notcontrol the internal file system and SD card from oscilloscope.ScopeNet can be used to view all the instruments and theircompatibility on the network . All functions and modes installedare available with ScopeNet. Do not use ScopeNet and SX-METROsimultaneously. This application can be installed on tabletsstarting at 7 inches or on SmartPhones starting at 4.3 inches(reduced command set).

Application designed to work with C.A 1510 Chauvin Arnoux logger(CO2, T°, RH).

This Android application is designed to work with Chauvin ArnouxData Loggers (temperature, humidity, illuminance, velocity, etc.).This gives you the possibility of viewing the measurements in realtime and displaying the recorded data directly on your smartphoneor tablet. You can then: - view the measurements in real time, -view the trend curves on the screen, - display recordedmeasurements, - export them in Excel or .txt format, - configureinstruments, - configure recordings. Multilingual applicationFirmware version v2.00 must be installed on the devices (C.A 1821,C.A 1822, C.A 1823, C.A 1246, C.A 1227, C.A 1110) with theBluetooth module update.”

The ASYC IV DMM application boosts the measurement possibilitiesofyour multimeter and allows you to connect to your version"A"100,000-count ASYC IV multimeter or to the version "B" modelviaBluetooth. This only concerns instruments equipped withtheBluetooth function, a range comprising 6 instruments: -MTX3292B-BTand MTX3292-BT - MTX3293B-BT and MTX3293-BT - CA5292-BT(P01196812) - CA 5293-BT (P01196813) . The main menu offers4possibilities: 1-- Connection to the instrument: to connect toaninstrument. 2 - Real-time measurements: takes you to the screenfordisplaying the real-time measurements in text format and thegraphdisplay. 3 - Instrument setup: to display the specificationsof theproduct connected. 4- Display snapshots: opens a screenfordisplaying screenshots (snapshots of real-timemeasurementtext-format screens or graphical representations) madeusing theAndroid device. In total safety, you can recover themainmeasurements from the multimeter in real time, display a graphandmake a screenshot to save your data and extend youranalysis.Bluetooth communication is used to authorize data recoveryfrom theMTX329*BT and/or CA 529*BT instrument selected.Real-timemeasurements: The application allows you to display theremotemeasurement and plot the measurements in graph form in realtime. Areminder of the Bluetooth communication setup procedure onthemultimeter is displayed every time there is a connection.Setup:The Setup function proposes synchronization of the instrumentdateand time with the settings on the Android device As theapplicationonly allows you to view the main measurement, a singletrace isprovided, whatever the device's position. The verticalscale isautomatic and adapts to the values read; the curve isspread aswidely as possible vertically on the screen. Theapplicationqueries the instrument at the acquisition intervalentered in theSetup menu; the horizontal scale shows the timeelapsed and is setby the refresh frequency entered in the Setupmenu. The trace isdisplayed over the whole width of the screen andthe horizontalscale is compressed as the number of pointsincreases. Screenshotusing the "camera" button It is possible todisplay screenshots ofthe real-time measurement display screens(texts and graphs). Thescreenshot captures the whole screen. Twoscreenshot modes areavailable: - short press on the button: simplescreenshot. - longpress: display of a screen for entering acomment. There are fourdifferent ways of viewing these screenshots:- By accessing the"Photo Gallery" application on the on the Androiddevice - Via the"Display snapshot" screen - By connecting to a PCusing a USB link- By displaying the screenshots

This Android application is designed to work with the F407 andF607Chauvin-Arnoux power harmonics clamps and the AEMCInstrumentsmodels 407 & 607, this gives you the remote clamp'sscreen andkeyboard. We can then: - view the measurements in realtime, -recover the stored files of recorded data, - export them inICP,Excel or CSV format, - view the trend curves on the screen.Theseare features available on the power clamp instrument. We haveaddednew features: - Real-time recording of severalparameterssimultaneously (AC and DC, etc.), - Real-time display ofall theharmonics at the same time. This app works with clampsfirmware2.06 and higher. Contact your local representative ifupgrade isneeded.

This Android application is designed to work with the C.A6417Chauvin Arnoux Clamp-on ground resistance testers and theAEMCInstruments model 6417, this gives the possibility to retrieveyourmeasurements directly on your smartphone or tablet and useGPSgeolocation to find the site corresponding to themeasurementinstantaneously. We can then: - view the measurements inreal time- display recorded measurements - configure theinstruments - viewthe trend curves on the screen. - add GPSposition - attach commentand picture to measurements - send reportsby email. Multilingualapplication