APK Download Apps Tools Precitec ProCutter Precitec ProCutter 3.3.0 APK

hourglass_full Your download should start automatically in a few seconds...

Download Precitec ProCutter_3.3.0.apk from Apk-Dl Server

Thank you for using Apk-Dl.com to download the apk file (Precitec ProCutter_3.3.0.apk),

If the download doesn't start automatically in a few seconds, please click here to access the download URL directly.

Note: Download and save the apk file to your Android Phone's SD card and install it manually onto the Android device.

Precitec ProCutter 3.3.0 screenshot 1 Precitec ProCutter 3.3.0 screenshot 2 Precitec ProCutter 3.3.0 screenshot 3 Precitec ProCutter 3.3.0 screenshot 4 Precitec ProCutter 3.3.0 screenshot 5 Precitec ProCutter 3.3.0 screenshot 6 Precitec ProCutter 3.3.0 screenshot 7 Precitec ProCutter 3.3.0 screenshot 8

Description

The Precitec ProCutter App is used to displaythe cutting head condition during operation and to query errormessages. As an option the app can also be used to set some sensorvalue parameters. The app connects via Bluetooth with the laserhead and shows the sensor values in different windows. There areseven different windows: connection, temperature, pressure, optics,errors, IO and system.

• Connection: shows active Bluetooth devices in thenetwork
• Temperature: shows the sensor values of the four temperaturesensors
• Pressure: shows cutting gas pressure and purging airpressure
• Optics: looks different, because of different laser headtypes
- Normal: focal positions, potentiometer offset, diffused light,lens configuration.
- ZoomCutter: aspect ratio replaces the lens configuration.
- Manual: just diffused light is shown.
• Errors: shows active error messages. If no error exists, thescreen is empty.
• IO: shows the IO-interface, with analogue voltages, currents andsignals.
• System: laser head firmware version and serial number.

Besides, in the system window there is a button. This buttonstarts the record of the measurement values. The measurement valuesare stored in a *.csv file, which is created in the memory of theused device. The App has two access modes, USER and OEM. Thedetermination is regulated through two different PINs. Users withUSER-rights can define the memory location and the sampling rate ofthe .csv file. Besides the USER can change his own PIN. The OEM canadditionally configure thresholds for the laser head. Furthermorethe OEM can change his own and the USER-PIN.

The functionality of the app could be restricted, because ofdifferent laser head firmware versions. The IO window is notsupported with firmware lower than 2.0.0. Also the one-time PINalgorithm is not supported for firmware versions below 2.0.3. Withthis algorithm a one-time change of your PIN is possible, when thePIN was forgotten or wrong entered.

The App works just as a display when the laser head is connectedthrough CAN. It is not possible to change any thresholds with theApp and the IO window is hidden.

The manuals in English and German versions are delivered in thepdf-format within the app. During the first start of the app, afterapproving the GTC, both versions of the manuals will be stored inthe download-section of the used device. Besides it is possible toopen the manual in the settings of the app. Depending on the usedlanguage in the device the German or English version will be shown.To display the manuals a pdf-viewer is required.