Description

Thank you for using my app!

DESCRIPTION
- With this application you can measure torque and horsepowercarengine
- The measurement results are stored in the memory of yourdeviceand you can view them at any time
- In addition, the measurement results can be exported toexcel-file(only available in the paid version)
- The measurement results can be viewed as graphs, as well astocompare the results of several graphics (available in thepaidversion)

HOW IT WORKS
- The measurement is carried out using the accelerometersensor.Torque and power are calculated from the data obtained withtheaccelerometer and the said vehicle parameters
- Vehicle parameters can usually be found in its detailedtechnicaldescription
- Meters in one gear. Typically, the best second transfer
- In order to measure as accurate as possible road should be asflatand straight
- To filter erroneous data from the accelerometer on the roughroadtemporal filter is applied, the level of filtering can be setinthe settings (Inertia accelerometer)

DESCRIPTION OF PARAMETERS
- Inertia accelerometer. Used to filter erroneous values ​​oftheaccelerometer on the rough road
- The rigidity of the suspension. In sharp acceleration ofthevehicle has a longitudinal roll, which depends on the stiffnessofthe suspension. This parameter is required to compensate fortheaccelerometer in roll
- Maximum engine speed. This parameter is required forcalculatingthe maximum power of the engine and to calculate thespeed at whichthe measurement ends
- The initial velocity measurement. With this speedpowermeasurement begins. Specify it so that it is slightly abovethespeed at which you turn on your chosen transfer
- Transmission gear ratios and tire size it is necessary tospecifyall cars are different
- The air resistance. Parameter can not change, but for largecarshigh this parameter can be a little increase
- Coefficient of deformation of the wheel. Parameter can notbechanged. However, for vehicles with high profile tires,thisparameter can be increased slightly
- Losses in transmission. Parameter can not be changed. However,forfour-wheel drive vehicles this parameter better slightlyincreasethe

INSTRUCTIONS FOR MEASURING
1. Enter the configuration parameters of your vehicle
2. Secure the device in a stationary state
2. Calibrate the accelerometer to calibrate by pressing
3. When the message "ready to start" gently move your vehiclewhenyou turn on the selected gear, fully depress the acceleratorpedaland accelerate up to the cut-off rpm
4. When the speed of the display is equal to the speed at thespeedof the cut-off, the measurement is completed, the resultwillremain