Description

For Calculation design water SprinklerSystemsin PIPE standard NFPA 13
Automatic fire sprinkler system water is a sprinkler system hasbeenrecognized as effective in controlling the fire was very good.Andare currently installed are widely used worldwide. You cancontrolthe fire that occurred immediately while the fire is stillsmall.Make fire stop its aggressive expansion. The birth was lesssmokeand fire occurred in a limited area. This system makes thebuildingmore and more time in the fire. Which represents the lifeof thebuilding will have more fire safety as well.

Download Manual Water Sprinkler Pro Calculation Design Link
https://drive.google.com/file/d/0BxaWWGlfYY6NY0FZWGN0RFo2U1U/view?usp=sharing

Function in Water Sprinkler Pro Calculation Design
1. Calculation Number Sprinkler
2. Calculation Area Sprinkler Nozzle
3. Calculation Flow Sprinkler
4. Calculation Pressure Sprinkler
5. Calculation Friction Loss Pipe or Pressure LossPipe(Hazen-william) Formula
6. Graph For Design Sprinkler
7. Table For Design Pipe Schedules Sprinkler, K-Factor,C VlaueLosspipe,Hose Stream Water
Type of Automatic Sprinkler System
1. Wet pipe systems is suitable for use with a fire atambienttemperature does not make the water in the pipesclotting.
2. Dry pipe systems is suitable to use for protected areasaregenerally below freezing temperatures. Which causes hardeningofthe water in the pipe. The pipeline will have a compressedairinstead of water. For countries with cold climates.
3. Tubular slow drying water (Pre Action System) system is idealforareas that require protection to avoid. Fire sprinkler systemsworkthat can go wrong.
4. Open (Deluge System) system is ideal for special fireprotectionarea. Fire or water in bulk from the sprinkler head open(OpenSprinkler) at the head of all the types of systems thatarediscussed in this.
In the design and installation of fire sprinkler water. Foranybuilding, regardless of water pressure tank or pipe publicwithsufficient pressure and flow. Determination of water to thefiresprinkler system, sprinkler. Occupied areas of the buildingmust betaken into consideration as well. This type ofdiscrimination thatis occupied. Will depend on the type andquantity of materials intofuel that is in the area.

An assortment of area occupied for the building is divided into3categories.
1. Space occupied less dangerous (Light Hazard Occupancies)refersto the place where the fuel and the ability to burn lowasresidential, office, school, hospital, etc.
2. Occupied dangerous medium (Ordinary Hazard Occupancies).
2.1. Space occupied moderate hazard group 1 (Ordinary HazardGroup1) refers to the place where the fuel is its ability to burnlow.Moderate amount of fuel Division of materials into fuel withamaximum height of 8 feet, such as electronicequipmentmanufacturing industries. Canned food factory, etc.
2.2. Space occupied moderate hazard group 2 (Ordinary HazardGroup2) refers to the place where the fuel and the ability to burnamoderate to high. Division of materials into fuel with amaximumheight of 12 feet, such as manufacturing, textiles, paperand pulpmills, etc.
3. occupy dangerous areas (Extra Hazard Occupancies).
3.1. The space occupied a very dangerous group 1 (Extra HazardGroup1) refers to the place where the fuel and the ability toburnextremely dusty or substances that cause an erection caughtfire.Or other material that could cause the flames quickly, butnotflammable and combustible materials, such as plywood andtimberproduction. Rubber industry, etc.
3.2. Occupied a very dangerous group 2 (Extra Hazard Group 2)refersto the place where the amount of flammable andcombustiblesubstances or storage medium to very large. These areasarecharacterized by the use involving flammable liquids(CombustibleLiquid) or flammable liquids (Flammable Liquid) such asplants,refineries, paint, etc.