Description

Demo version of IR Blaster. Use this demo to determine if IRBlaster is compatible with your devices and apps.
Contains all the same functionality as IR Blaster but will stoplistening for incoming requests after 20 requests are received.

This app is not yet mature and has not been tested on manydevices. Please report any positive or negative feedback to[email protected]so issues can be addressed. Thanks!

There are 2 reasons you may want to use IR Blaster.
1 - Your remote control app does not have the ability to controlyour built in IR blaster
2 - You want to control 1 device's built in IR blaster from a 2nddevice

Example usage scenario with 1 device:
- Your favorite remote control app has the ability to control aniTach but can't control your built in IR Blaster
- Install IR Blaster on your device
- Start IR Blaster, create an iTach IR emulator and start theemulator
- In your remote app, configure a new iTach device at ip address127.0.0.1 (the loopback to self ip address)
- Your remote app can now control your internal IR Blaster

Example usage scenario with 2 devices:
- Install this app on a Samsung Galaxy Tab 2 device
- Start the app, add an iTach IR emulator and start theemulator
- Note the ip address and port the emulator is listening on. The ipaddress and port are separated by a colon.
- From a 2nd device, install any app capable of controlling aniTach IR device (mbhRemote for example)
- Configure the 2nd device to communicate with the ip address andport the 1st device is listening on
- The 2nd device can now control the IR Blaster on the 1stdevice

Requires a hardware device with a built in IR Blaster.

When using the iTach IR emulator, configure your remote app tosend commands to channel 3.

Supported Devices:
Samsung Galaxy Tab 2
Samsung Galaxy S4
Samsung Galaxy S5 (use device type 'Generic IR Device')
Samsung Galaxy Note
Htc One

Emulators:
Global Cache' iTach IR

Supported apps:
Any app that can communicate with an iTach IR device should be ableto communicate with IR Blaster