Description

GSM Alarm manager application toremotelycontrol your GSM home / office alarm system.

Features include:

1) Alarm status feedback.
2) Support of Arm, Disarm, Home / Stay, Cancel Alarm andStatuscommands.
3) Define your own home / office alarm system set-up.
4) Customise your own zones, to help with easy identificationoftriggered zones.
5) Log of all messages sent & received, which can beexportedvia email.

How to … Define your own alarm

1) Navigate to settings->Alarm Setup-> Add / Edit
2) Enter the Make & Model
3) In “Command Mask” define the command format youralarmunderstands. The application will substitute “#passcode” withthepasscode defined in settings and “#command” with themappedcommand. For example: “PWD:#passcode CMD:#Command”, will sendthealarm the command “PWD:1234 CMD:ARM” on arm
4) Map the commands your alarm understands. Hence, if youthecommand for arming the alarm is then map “AA” to “Arm” (checkyouruser manual)
5) Save

How to … Define your own zones

1) Navigate to settings->Define Zones
2) Tap “Add Zone”
3) Supply a “Zone Identifier”. This need to match the Zone thatissend by your alarm. Hence if you alarm sends you a message“Alert:Zone 01 Entry / Exit”, then the Zone Identifier is “Zone01”.
4) Supply the corresponding “Zone Description” (i.e.FrontDoor)
5) Tap “Ok”

There are three pre-configured alarms, send us an email withyourset-up and any suggestions for improvements and we'll includeinfuture releases.