Description

(Note: you may also be interested freeKeysight mobile app named BenchVue Mobile that supportsoscilloscopes, spectrum analyzers, function generators, DMMs, andpower supplies.)

Keysight Oscilloscope Mobile is the result of an investigation byKeysight Labs. It enables you to view live waveforms, makemeasurements, capture instrument screenshots and control yourKeysight/Agilent oscilloscope from your iPad or iPhone.

Key Features
- Supports up to 4 analog channels
- Simulation mode available - experiment with the app beforeconnecting it to your oscilloscope
- Save screen captures from your instrument onto your mobiledevice
- View and control oscilloscopes that are connected by LAN, USB,GPIB or RS232
- Collaboration - Have a colleague connect to the same scope ontheir tablet or phone and see what you see.

Control the following functions on your Keysight/Agilentoscilloscope (see below for supported models/firmware)
- Start/stop/single acquisition
- Autoscale
- Change time/div
- Change volts/div
- Turn channels on/off
- Select trigger type/level/source
- Measure: frequency, rise/fall time, min/max, peak-peak

Connecting to an Oscilloscope
If your oscilloscope is on the network, you can connect to itdirectly from your mobile device as follows:
1. On your mobile device, start Oscilloscope Mobile and tap Connectto Scope
2. For the Choose Connection setting, tap Direct
3. Enter the IP Address or hostname of your oscilloscope and tapConnect

If your oscilloscope is connected to your PC via LAN, GPIB, USB orRS232, you can connect to it through Oscilloscope Mobile Agentrunning on your PC as follows:
1. On your Windows PC ( WinXP, Win7, Win8, Win10), install KeysightOscilloscope Mobile Agent (available free fromhttp://www.keysight.com/find/scopemobile)
2. Start the Keysight Oscilloscope Mobile Agent on your PC andconnect to your oscilloscope.
3. Start this app and tap Connect to Scope.
4. Enter the IP Address or hostname of your PC and tapConnect.

Viewing a Simulated Oscilloscope
To view and control a simulated oscilloscope:
1. Start this app and tap Simulate Scope.

System Requirements
Android 4.0.3 and up

Supported Oscilloscope Models
The following Keysight/Agilent 0scilloscope series and firmwarerevision levels are supported:
InfiniiVision 2000 X-Series, minimum firmware revision 01.10
InfiniiVision 3000A X-Series, minimum firmware revision 01.10
InfiniiVision 3000T X-Series, minimum firmware revision 04.00(1)
InfiniiVision 4000 X-Series, minimum firmware revision 01.10
InfiniiVision 5000 Series, minimum firmware revision 05.20(1)
InfiniiVision 6000 Series, minimum firmware revision 05.20
InfiniiVision 6000 X-Series, minimum firmware revision 06.00(2)
InfiniiVision 7000 Series, minimum firmware revision 05.20
Infiniium 9000 Series, minimum firmware revision 03.10
Infiniium S-Series, minimum firmware revision 05.00 (2)

Notes:
1. When connecting through a PC, requires Oscilloscope Mobile Agent1.5 or above
2. When connecting through a PC, requires Oscilloscope Mobile Agent1.4 or above

Support and Feedback
Please email [email protected] to report bugs, askquestions or give us your feedback.